AB -- runt/libs/tool-manifest-writer

• AB01: Failed to build the immutable manifest from the mutable one. <MutableJavaManifest.java>
• AB02: The specified value is of the wrong class type. <MutableJavaManifest.java>

AC -- runt/libs/collections

• AC01: There was at least one exception which occurred while closing the list. <CloseableList.java>
  • The number of exceptions thrown
• AC02: The empty iterator contains no elements. <EmptyIterator.java>
• AC03: Cannot remove elements from the empty iterator. <EmptyIterator.java>
• AC04: The empty list contains no elements. <EmptyList.java>
• AC05: The sub-deque limit is zero or negative. <MultiSetDeque.java>
• AC06: No more elements to iterate over. <__MapIterator__.java>
• AC07: No last entry exists for deletion. <__MapIterator__.java>
• AC08: Referenced node was deleted. <__MapIterator__.java>
• AC09: Deque capacity would be exceeded. <__Sub__.java>
• AC0a: The deque is empty. <__Sub__.java>
• AC0b: The deque is empty. <__Sub__.java>

AD -- runt/apis/meep-midlet

• AD01: No MIDlet is currently active. <ActiveMidlet.java>
• AD02: Only a single MIDlet may be active at a time. <ActiveMidlet.java>
• AD03: Cannot use check permission on MIDP 3.0 or MEEP suite profiles. <MIDlet.java>

AE -- runt/libs/summercoat-vm

• AE01: Attempt to write very large configuration item. <ConfigRomWriter.java>
  • The length
• AE02: Virtual machine exception. <NativeCPU.java>
  • The failing instruction
• AE03: Reference to register which is out of range of maximum number of registers. <NativeCPU.java>
  • The register index
• AE04: CPU breakpoint hit. <NativeCPU.java>
• AE06: Cannot write to the specified address. <RawMemory.java>
  • The address to write to
• AE07: Cannot write to the specified address. <RawMemory.java>
  • The address to write to
• AE07: No control specified. <NullPlayer.java>
• AE08: Cannot write to the specified address. <RawMemory.java>
  • The address to write to
• AE09: Suite chunk size limit was exceeded. <SuiteMemory.java>
  • The required chunk size
  • The limit
  • More space that is needed
• AE0a: Could not initialize the supervisor. <SuitesMemory.java>
• AE0b: Could not write the virtual packfile. <SuitesMemory.java>
• AE0c: Could not load SummerCoat ROM. <SummerCoatFactory.java>
  • File
• AE0d: Could not write to configuration ROM. <SummerCoatFactory.java>
• AE0e: Could not read the boot JAR header. <SummerCoatFactory.java>
• AE0f: Corrupt Boot RAM with invalid value modifier. <SummerCoatFactory.java>
  • Modifier
• AE0g: Corrupt Boot RAM with invalid size. <SummerCoatFactory.java>
  • Size
• AE0h: Could not initialize the boot RAM for the virtual machine. <SummerCoatFactory.java>
• AE0i: Invalid read from unmapped or non-writable memory! <VirtualMemory.java>
  • The address
• AE0j: Invalid write to unmapped or non-writable memory! <VirtualMemory.java>
  • The address
  • The value to write
• AE0k: Reached end of memory. <WritableMemoryOutputStream.java>
• AE0l: Reached end of memory. <WritableMemoryOutputStream.java>
• AE0m: Return from the main frame without using a system call to exit. <NativeCPU.java>
  • The return value pair
  • The exception register
• AE0n: Invalid instruction. <NativeCPU.java>
• AE0o: Fatal ToDo system call executed. <NativeCPU.java>
• AE0p: Could not find library. <SuiteMemory.java>
  • The library
• AE0q: Suite space has exceeded size limit of 2GiB. <SuitesMemory.java>
  • The current size
  • The amount of bytes over

AF -- bldt/javase/libs/javase-runtime

• AF01: Cannot obtain class data. <ObjectAccess.java>
• AF02: Cannot check if another thread holds a lock for an object. <ObjectAccess.java>
• AF03: Cannot invoke static method. <ObjectAccess.java>
• AF04: Cannot set weak reference which has already been set. <__WeakRef__.java>
• AF05: Unknown host. <JavaSEIPConnectionFactory.java>
• AF06: No entry points were found. <Main.java>
• AF07: The main method is not static. <Main.java>
• AF08: No manifest is available? <Main.java>
• AF09: No main class is available? <Main.java>
• AF0a: Cannot use the specified pixel format. <ColorInfo.java>
  • The pixel format to use
• AF0b: Unsupported pixel format. <ColorInfo.java>
  • The pixel format to use
• AF0c: Unsupported pixel format. <ColorInfo.java>
  • The pixel format to use
• AF0d: Aliased object to pointer. <Assembly.java>
  • Value
• AF0e: Aliased pointer to object. <Assembly.java>
  • Value
• AF0f: Invalid system call error code. <SystemCallException.java>

AH -- runt/libs/tool-profiler

• AH01: Cannot enter frame which is in the entered state. <ProfiledFrame.java>
• AH02: Cannot enter frame that is in an invoke. <ProfiledFrame.java>
• AH03: Cannot exit frame which is in the exited state. <ProfiledFrame.java>
• AH04: Cannot exit frame that is in an invoke. <ProfiledFrame.java>
• AH05: Frame is not in an invoke. <ProfiledFrame.java>
• AH06: Frame is already invoking another frame. <ProfiledFrame.java>
• AH07: No frame is in the stack to exit in. <ProfiledThread.java>
• AH08: Cannot write negative number of nodes. <__NodeTable__.java>

AI -- test/mids/tac-runner

• AI01: Unknown report type. <Report.java>

AJ -- runt/libs/common-vm-stubs

• AJ01: Cannot obtain class data. <ObjectAccess.java>
• AJ02: Cannot check if another thread holds a lock for an object. <ObjectAccess.java>
• AJ03: Cannot invoke static method. <ObjectAccess.java>
• AJ04: Cannot interrupt threads using this method as it is not implemented. <TaskAccess.java>
• AJ05: Cannot set weak reference which has already been set. <__WeakRef__.java>

AK -- runt/libs/common-vm

• AK01: Could not read the library list. <ResourceBasedSuiteManager.java>
• AK02: Neither the boot class or boot ID was specified, one must be specified. <VMFactory.java>
• AK03: The specified virtual machine does not exist. <VMFactory.java>
  • The virtual machine name
• AK04: Entry point JAR has no manifest. <VMFactory.java>
• AK05: Failed to read the manifest. <VMFactory.java>
• AK06: Could not find the specified main class in the entry point list. <VMFactory.java>
  • The main class
• AK07: Could not read the manifest to load the launcher's classpath. <VMFactory.java>
• AK08: Could not locate the class to use for resource lookup. <VMFactory.java>
  • The class which was not found
• AK09: Could not load resource list. <ResourceBasedClassLibrary.java>

AP -- bldt/mids/pcf-to-sqf

• AP01: Invalid PCF magic number. <PCFFont.java>
• AP02: Expected EOF to occur on the last entry, this likely means the file was truncated more than what was expected. <PCFFont.java>
• AP03: Negative skip distance. <PCFFont.java>
• AP04: Unknown PCF type. <PCFFont.java>
  • The type

AQ -- runt/libs/tool-compiler

• AQ01: No input files. <Compiler.java>
• AQ02: Could not find the specified input in the distinct path set. <DistinctPathSet.java>
  • The input
• AQ03: Could not obtain the last modified time. <FileInput.java>
• AQ04: The specified path does not exist. <FileInput.java>
  • The path to the file
• AQ05: Could not read from the specified path. <FileInput.java>
  • The path to the file
• AQ06: The specified input does not exist in the path set filesystem. <FilePathSet.java>
  • The name
  • The expected path
• AQ07: Could not list directory contents. <FilePathSet.java>
• AQ08: Could not close the merged path set. <MergedPathSet.java>
• AQ09: Could not find the specified input in the merged path set. <MergedPathSet.java>
  • The input
• AQ0a: Failed to write the specified file to the output stream. <ZipCompilerOutput.java>
  • The file name
• AQ0b: Cannot write a single byte after the output has been closed. <ZipCompilerOutput.java>
• AQ0c: Cannot write multiple bytes after the output has been closed. <ZipCompilerOutput.java>
• AQ0d: Failed to open the ZIP entry. <ZipInput.java>
  • The name of the entry
• AQ0e: Could not close the source ZIP. <ZipPathSet.java>
• AQ0f: No such entry exists within the ZIP. <ZipPathSet.java>
  • The name of the entry
• AQ0g: Read error attempting to open the input entry. <ZipPathSet.java>
  • The name of the entry
• AQ0h: Could not locate the node for the given class name, the source file where the class should have been located did not actually contain the class. <CompilerState.java>
  • The class name
• AQ0i: Could not locate the node for the given class name. <CompilerState.java>
  • The class name
• AQ0j: Failed to compile. <CuteRunnable.java>
• AQ0k: Failed to compile. <CuteRunnable.java>
  • An exception or error was suppressed
• AQ0l: Cannot determine classname of file because it has an unknown suffix. <CuteRunnable.java>
  • The file name
• AQ0m: Parsing input source file for classes to compile. <SourcedClassNode.java>
• AQ0n: Could not read the input source file. <SourcedClassNode.java>
  • The input source file
• AQ0o: Duplicate parameter name. <FormalParameters.java>
  • The name of the parameter
• AQ0p: Cannot process source file which does not end in .java. <RuntimeInput.java>
• AQ0q: Cannot parse the source file because it does not have a valid name. <RuntimeInput.java>
• AQ0r: The source file does not exist. <RuntimeInput.java>
• AQ0s: Could not parse the syntax for the source file because it failed to read or has invalid syntax. <RuntimeInput.java>
• AQ0t: Source code file specified a package which does not match the package represented in the source code itself. <RuntimeInput.java>
  • The package the source is in
  • The package the source code actually specified
• AQ0u: Source file declares no classes. <RuntimeInput.java>
• AQ0v: Class file contains multiple public classes. <RuntimeInput.java>
  • The first found public class
  • The second found public class
• AQ0w: The name of the public class in the file does not match the expected name of the source file. <RuntimeInput.java>
  • The public class name
• AQ0x: Source package-info files cannot specify any classes. <RuntimeInput.java>
• AQ0y: Duplicate modifier. <StructureModifiers.java>
  • The modifier
• AQ0z: Unsupported modifier type. <StructureModifiers.java>
  • The type
• AQ10: Structure has no symbol. <Structures.java>
• AQ11: A structure already exists with the given symbol. <Structures.java>
  • The symbol
• AQ12: Duplicate type parameter identifier. <TypeParameters.java>
  • The identifier
• AQ13: Expected at symbol at start of annotation. <AnnotationSyntax.java>
• AQ14: Expected comma or closing parenthesis at end of annotation expression. <AnnotationSyntax.java>
• AQ15: Expected comma or closing brace after annotation value. <AnnotationSyntax.java>
• AQ16: Duplicated throw statement. <ClassConstructorSyntax.java>
  • The throw statement which was duplicated
• AQ17: Illegal modifiers specified for class constructor. <ClassConstructorSyntax.java>
  • The modifiers
• AQ18: Expected identifier at start of constructor. <ClassConstructorSyntax.java>
• AQ19: Illegal class modifiers specified with the the given class type. <ClassSyntax.java>
  • The class type
  • The class modifiers
• AQ1a: Duplicate extends specified. <ClassSyntax.java>
  • The type
• AQ1b: The specified class of the given type cannot extend the given types. (The class type; The inherited types <ClassSyntax.java>
• AQ1c: Duplicate implements specified. <ClassSyntax.java>
  • The type
• AQ1d: The specified class of the given type cannot implement the given types. (The class type; The inherited types <ClassSyntax.java>
• AQ1e: An interface cannot contain a member represented by the given type. <ClassSyntax.java>
  • The class type
• AQ1f: An annotation cannot contain a member represented by the given type. <ClassSyntax.java>
  • The class type
• AQ1g: An class or enum cannot contain a member represented by the given type. <ClassSyntax.java>
  • The class type
• AQ1h: Class constructor name does not match the name of the class. <ClassSyntax.java>
  • This class name
  • The constructor name
• AQ1i: Expected opening brace at start of class. <ClassSyntax.java>
• AQ1j: The specified token does not represent a member that is a class, field, or method. <ClassSyntax.java>
• AQ1k: Expected interface to follow at symbol for declaring an annotation type. <ClassSyntax.java>
• AQ1l: Unknown token while parsing class. <ClassSyntax.java>
• AQ1m: Expected identifier to name the class as. <ClassSyntax.java>
• AQ1n: This type of class cannot extend other classes. <ClassSyntax.java>
• AQ1o: This type of class cannot implement interfaces. <ClassSyntax.java>
• AQ1p: Expected closing brace at end of class. <ClassSyntax.java>
• AQ1q: Only annotation are valid modifiers for packages. <CompilationUnitSyntax.java>
• AQ1r: Classes contained within a compilation unit cannot be static, protected, or private. <CompilationUnitSyntax.java>
  • The modifiers
• AQ1s: Expected semi-colon to follow the package statement. <CompilationUnitSyntax.java>
• AQ1t: Expected end of file or semicolons after an annotated package statement, annotated packages are only valid in package-info.java. <CompilationUnitSyntax.java>
• AQ1u: Illegal modifiers specified for formal parameter. (The modifiers <FormalParameterSyntax.java>
• AQ1v: Expected opening parenthesis when parsing formal parameters. <FormalParametersSyntax.java>
• AQ1w: Expected identifier for the parameter name. <FormalParametersSyntax.java>
• AQ1x: Expected closing bracket to follow opening bracket for array declaration. <FormalParametersSyntax.java>
• AQ1y: Expected closing parenthesis to follow variadic argument in formal parameter. <FormalParametersSyntax.java>
• AQ1z: Expected "import" when parsing an import statement. <ImportStatementSyntax.java>
• AQ20: Expected identifier at start of import statement. <ImportStatementSyntax.java>
• AQ21: Expected identifier while parsing the import statement. <ImportStatementSyntax.java>
• AQ22: Expected semicolon to follow the wildcard symbol in the import statement. <ImportStatementSyntax.java>
• AQ23: Expected dot or semi-colon to follow the identifier in the import statement. <ImportStatementSyntax.java>
• AQ24: Parsed import declaration is not a valid binary name. <ImportStatementSyntax.java>
• AQ25: Duplicate modifier. <ModifiersSyntax.java>
  • The modifier
• AQ26: There may be only one or none specified for public, protected, or private. <ModifiersSyntax.java>
  • The modifiers
• AQ27: Duplicate modifier. <ModifiersSyntax.java>
  • The modifier
• AQ28: Duplicate modifier while parsing formal parameter modifiers. <ModifiersSyntax.java>
  • The modifier
• AQ29: Expected identifier while parsing qualified identifier. if (token.type() != TokenType.IDENTIFIER) throw new SyntaxParseException(token, "AQ29"); Start with initial base StringBuilder sb = new StringBuilder(); sb.append(token.characters()); Try to keep reading identifiers for (;;) { Parsing no more token = __t.peek(); if (token.type() != TokenType.SYMBOL_DOT) break; Consume the dot __t.next(); {@squirreljme.error AQ2a Expected identifier to follow dot in qualified identifier. <QualifiedIdentifierSyntax.java>
• AQ2b: The specified identifier is not a valid binary name. <QualifiedIdentifierSyntax.java>
  • The identifier
• AQ2c: Mismatch between the method having code or not and it being abstract and/or native. <SimpleMethodSyntax.java>
• AQ2d: Duplicated throw statement. <SimpleMethodSyntax.java>
  • The throw statement which was duplicated
• AQ2e: Illegal modifiers specified for simple method. <SimpleMethodSyntax.java>
  • The modifiers
• AQ2f: Expected identifier to name the method. <SimpleMethodSyntax.java>
• AQ2g: Expected semicolon to follow abstract or native method. <SimpleMethodSyntax.java>
• AQ2h: Types cannot have negative dimensions. <TypeSyntax.java>
• AQ2i: Cannot initialize type with a negative number of dimensions. <TypeSyntax.java>
• AQ2j: Invalid type. <TypeSyntax.java>
• AQ2k: Expected closing bracket to follow opening bracket when declaring type. <TypeSyntax.java>
• AQ2l: Expected start of expression to start with a given symbol. <UnparsedExpressions.java>
  • The expected symbol
• AQ2m: This token might not have been closed properly as the end of file was reached. <UnparsedExpressions.java>
• AQ2n: Expected identifier while parsing a primary expression. <ExpressionSyntaxParsers.java>
• AQ2o: This is not a valid primary expression. <ExpressionSyntaxParsers.java>
• AQ2p: Could not close the token source. <BufferedTokenSource.java>
• AQ2q: Cannot reset a mark when there have been no marks which were made. <BufferedTokenSource.java>
• AQ2r: Cannot peek a token with a negative offset. <BufferedTokenSource.java>
• AQ2s: Cannot reset a mark when there have been no marks which were made. <BufferedTokenSource.java>
• AQ2t: Unicode sequence truncated at end of file. <LogicalReader.java>
• AQ2u: Invalid unicode escape sequence. <LogicalReader.java>
  • The line
  • The column
• AQ2v: Failed to close the tokenizer. <Tokenizer.java>
• AQ2w: Invalid elipses, three dots were expected but only two were read. <Tokenizer.java>
• AQ2x: Unknown character while tokenizing the Java source code. <Tokenizer.java>
  • The character
  • The line
  • The column
• AQ2y: Could not determine the operator to decode. <Tokenizer.java>
• AQ2z: Could not decode an operator. <Tokenizer.java>
• AQ30: The specified keywords are reserved and not valid. <Tokenizer.java>
  • The keyword
• AQ31: End of file reached while reading a multi-line comment. <Tokenizer.java>
• AQ32: An identifier character cannot follow a numerical literal. <Tokenizer.java>
  • The next character
• AQ33: Number has multiple decimal points, only one is valid. <Tokenizer.java>
• AQ34: No numberal literals left to put the literal under as they have all been ruled out. <Tokenizer.java>
  • The current string sequence
• AQ35: Could not determine type of number literal is used for the given string. <Tokenizer.java>
  • The token string
• AQ36: Could not read the next character. <Tokenizer.java>
• AQ37: Could not determine the used operator for the given sequence. <Tokenizer.java>
  • The sequence
• AQ38: No input resource exists. <ResourcePathSet.java>
  • The name
• AQ39: No resource input exists. <ResourceCompilerInput.java>
  • The filename
• AQ3a: Exception closing class resource. <ResourcePathSet.java>
• AQ3b: Could not read list file. <ResourcePathSet.java>
• AQ3c: Could not check if entry was a directory or not. <ZipPathSetIterator.java>

AR -- build/squirreljme-ipc

• AR01: An illegal character was specified in the API name. (The API name) if (StringUtils.firstIndex("0rn:;", __n) >= 0) throw new InvalidSuiteException(String.format("AR01 %s", __n)); {@squirreljme.error DG02 API name cannot be blank. <APIName.java>
• AR02: Expected two or three fields for the configuration. <Configuration.java>
  • The input string
• AR03: Expected two commas in the MIDlet field. <EntryPoints.java>
• AR04: Expected input standard string to contain three fields separated by semi-colon. <Standard.java>
  • The input string
• AR05: Name in standard string is empty. <Standard.java>
  • The input string
• AR06: Expected four semi-colons in the dependency field. <SuiteDependency.java>
  • The input dependency
• AR07: Expected two semi-colons in the dependency field. <SuiteDependency.java>
  • The input dependency
• AR08: Illegal dependency check. <SuiteDependency.java>
  • The dependency type
  • The target class
• AR09: Dependencies on LIBlets must have the name, vendor, and version set. <SuiteDependency.java>
  • The type
  • The level
  • The name
  • The vendor
  • The version
• AR0a: The specified string is not a valid dependency type. <SuiteDependencyType.java>
  • The input string
• AR0b: No suite name was specified. <SuiteInfo.java>
• AR0c: No suite vendor was specified. <SuiteInfo.java>
• AR0d: No suite version was specified. <SuiteInfo.java>
• AR0e: An illegal character was specified in the midlet suite name. <SuiteName.java>
  • The midlet suite name
• AR0f: Cannot have a zero or negative dependency index. <SuiteType.java>
• AR0g: Could not obtain the type of suite from the input manifest. <SuiteType.java>
• AR0h: An illegal character was specified in the midlet suite vendor. <SuiteVendor.java>
  • The midlet suite vendor
• AR0i: Input version number is out of range, only 0 through 99 are valid. <SuiteVersion.java>
  • The major version
  • The minor version
  • The release version
• AR0j: Too many version fields in the specified string. <SuiteVersion.java>
  • The input string
• AR0k: An illegal character is in the version string. <SuiteVersion.java>
  • The input string
  • The illegal character
• AR0l: The version range cannot be blank. <SuiteVersionRange.java>
• AR0m: Major only wildcard versions must be a single asterisk. <SuiteVersionRange.java>
  • The input string
• AR0n: The last dot in a wildcard must be before the asterisk. <SuiteVersionRange.java>
  • The input string
• AR0o: There are too many decimal points in the wildcard version string. <SuiteVersionRange.java>
  • The input string

AU -- bldt/libs/builder-support

• AU01: Could not read the source manifest. <BasicSource.java>
• AU02: Could not read the binary manifest. <Binary.java>
• AU03: Could not get the path set for this binary. <Binary.java>
• AU04: Cannot get suite information for the binary because there is no source code. <Binary.java>
• AU05: Cannot get the ZIP for this binary because it is out of date. <Binary.java>
  • The name of this binary
• AU06: Cannot get the ZIP for this binary because it is out of date. <Binary.java>
  • The name of this binary
• AU07: Cannot compile the specified project because it has no source code. <BinaryManager.java>
  • The name of the project
• AU08: Compiling the given project. <BinaryManager.java>
  • The project name
• AU09: Could not compile the specified project. <BinaryManager.java>
  • The project which failed to compile
• AU0a: The specified binary does not exist. <BinaryManager.java>
  • The name of the binary
• AU0b: Cannot open the specified path as a project because it does not exist. <BinaryManager.java>
  • The path to open as a binary
• AU0c: Could not locate the binary which statifies the given dependency. <BinaryManager.java>
  • The dependency to look for
• AU0d: Expected at sign in squirreljme.project type dependency. <BinaryManager.java>
  • This project
• AU0e: Could not locate the project with the specified dependency. <BinaryManager.java>
  • This project
  • The dependency
• AU0f: No command given. <BuilderFactory.java>
• AU0g: Could not build the distribution. <BuilderFactory.java>
  • The failed distribution
• AU0h: No distributions were specified for building. <BuilderFactory.java>
• AU0i: Could not build at least one distribution. <BuilderFactory.java>
• AU0j: Unknown argument. Usage: vmshade [-v vmname] [-n NPS path] [-Dkey=value] [-e] (program[:launchid]); -v: The name of the virtual machine to use, this may be springcoat or summercoat. -n: Path to write NPS files to. -D: System property key/value pair. -e: List entry points but do not run program. <BuilderFactory.java>
  • The switch
• AU0k: Launch of program using a SquirrelJME VM requires a program to be launched. <BuilderFactory.java>
• AU0l: Unknown argument. Usage: build [-R] [-J] [-T] [-B] (projects...); -R: Build for run-time; -J: Build for jit-time; -T: Build for tests; -B: Build for build-time; <BuilderFactory.java>
  • The switch
• AU0m: Unknown argument. Usage: build [-R] [-J] [-T] [-B] (projects...); -R: Build for run-time; -J: Build for jit-time; -T: Build for tests; -B: Build for build-time; <BuilderFactory.java>
  • The switch
• AU0n: Unknown command specified. Usage: command (command arguments...); Valid commands are: build, javadoc, launch, sdk, suite, task, vmshade .<BuilderFactory.java>
  • The switch
• AU0o: Could not initialize the SDK factory. <BuilderFactory.java>
• AU0p: Unknown argument. Usage: vmshade [-b JAR] [output]; -p: Bootstrap JAR Path, defaults to bootsjme/javase-runtime.jar; -b: Build and include the bootstrap; -R: Build with run-time level (the default); -J: Build with jit-time level; -T: Build with tests level; -B: Build with build-time level; <BuilderFactory.java>
  • The switch
• AU0q: Could not build the shaded JAR. <BuilderFactory.java>
• AU0r: The specified option argument requires a value set to it. <BuilderFactory.java>
  • The option argument
• AU0s: Binary paths array count does not match the number of time spaces available. <ProjectManager.java>
• AU0t: Could not obtain the binary manager. <ProjectManager.java>
• AU0u: Could not obtain the binary manager. <ProjectManager.java>
• AU0v: Unknown project argument. Usage: [-s path] [-o path] [-r path] [-j path] [-b path]; -s: The project source path; -o: The base directory for binary output; -r: The binary path for the run-time; -j: The binary path for the jit-time; -t: The binary path for the tests; -b: The binary path for the build-time; -R: Default timespace is run-time; -J: Default timespace is JIT; -T: Default timespace is tests; -B: Default timespace is build-time <ProjectManager.java>
• AU0w: Expected command for SDK operation. <SDKFactory.java>
• AU0x: The specified sdk command is not valid. Valid commands are: build, internal .<SDKFactory.java>
  • The command
• AU0y: Could not approximate the binary suite information. <Source.java>
  • The name of the project
• AU0z: No such source project exists. <SourceManager.java>
  • The name of the source project
• AU10: Tried to load a project but it was determined to not be a valid project, ignoring. <SourceManager.java>
  • The project name
  • The exception message
• AU11: The project source name contains an invalid character. <SourceName.java>
  • The specified character
• AU12: Expected command for suite operation. <SuiteFactory.java>
• AU13: The "suite install" command requires a path to a JAR file to install. <SuiteFactory.java>
• AU14: Read/write error installing suite. <SuiteFactory.java>
• AU15: The specified suite command is not valid. Valid commands are: ls, list; install (path); . <SuiteFactory.java>
  • The command
• AU16: Expected command for task operation. <TaskFactory.java>
• AU17: Unknown argument. Usage: launch [suite] (class name). <TaskFactory.java>
• AU18: Expected name of class to start as a system task. <TaskFactory.java>
• AU19: The task exited with the given status. <TaskFactory.java>
  • The status
• AU1a: The specified task command is not valid. Valid commands are: ls, list, launch .<TaskFactory.java>
  • The command
• AU1b: Could not locate a suite with the given name. <TaskFactory.java>
  • The input name
• AU1c: Could not parse file for tests. <TestParser.java>
• AU1d: The suite installation failed with the given error code. <__SuiteInstallWaiter__.java>
  • The error code
• AU1e: No distribution exists under the given name. <DistBuilder.java>
  • The distribution name
• AU1f: The root file does not exist. <DistBuilder.java>
  • The name of the file
• AU1g: Could not list suites available. <BuildSuiteManager.java>
• AU1h: Could not load the binary manager. <BuildSuiteManager.java>
• AU1i: No such library exists. <BuildSuiteManager.java>
  • The requested library
• AU1j: No project to launch was specified. The format is project-name or project-name:entry-point-id. <VMMain.java>

AW -- runt/mids/lcdui-demo

• AW01: The timer cannot be zero or negative. <RepaintTimer.java>

AX -- test/mids/dump-zip

• AX01: Cannot read from a negative offset. <FileChannelBlockAccessor.java>
• AX02: Read past end of file. <FileChannelBlockAccessor.java>
• AX03: Cannot read from a negative offset. <FileChannelBlockAccessor.java>
• AX04: Failed to properly read the specified file. <Main.java>
  • The file name
  • The last entry read

AZ -- test/mids/uudecode

• AZ01: Unknown command line switch. <Main.java>
  • The switch

BB -- runt/libs/tool-manifest-reader

• BB01: Expected colon to appear on the manifest line, to split a name/value pair. <JavaManifest.java>
• BB02: Manifest key contains an invalid character. <JavaManifest.java>
• BB03: New section must start with Name: value. <JavaManifest.java>
  • The input section

BC -- runt/libs/tool-jarfile

• BC01: Could not export boot area. <Initializer.java>
• BC02: Could not locate instance field. <LoadedClassInfo.java>
  • Class
  • Field Name
  • Field Type
• BC03: Ran out of static field space. <BootstrapState.java>
• BC04: Could not locate static field. <LoadedClassInfo.java>
  • Class
  • Field Name
  • Field Type
• BC07: Could not locate the given method. <LoadedClassInfo.java>
  • The class
  • The name
  • The type
• BC08: Could not find the specified method. <LoadedClassInfo.java>
  • The method name
  • The method type
• BC0a: Invalid minimized Jar magic number. <MinimizedJarHeader.java>
  • The read magic number
  • The expected magic number
• BC0b: Class file has already been loaded. <BootstrapState.java>
  • The class name
• BC0c: Could not find the specified class. <BootstrapState.java>
  • The class name
• BC0d: The bootstrap state was garbage collected, therefor this class is no longer valid. <LoadedClassInfo.java>
• BC0e: Cannot allocate negative static field space. <BootstrapState.java>
• BC0f: Value not found in any pool. <LoadedClassInfo.java>
  • The value

BD -- runt/libs/io

• BD01: Read EOF from input when there were expected to be more characters or the ending padding character. <Base64Decoder.java>
  • The bits in the buffer
• BD02: Did not expect a padding character. <Base64Decoder.java>
  • The number of decoded bits in queue
• BD03: Expected another padding character. <Base64Decoder.java>
• BD04: Could not decode the input string. <Base64Decoder.java>
• BD0m: A negative number of bytes cannot be grabbed. <DynamicHistoryInputStream.java>
  • The number of bytes to grab
• BD0n: Cannot grab bytes because the stream is closed. <DynamicHistoryInputStream.java>
• BD0o: Cannot a peek byte which have already been read. <DynamicHistoryInputStream.java>
  • The requested index
• BD0p: Cannot peek a single byte because the stream is closed. <DynamicHistoryInputStream.java>
• BD0q: Cannot peek bytes which have already been read. <DynamicHistoryInputStream.java>
  • The requested index
• BD0r: Cannot peek multiple bytes because the stream is closed. <DynamicHistoryInputStream.java>
• BD0s: Cannot read a single byte because the stream has been closed. <DynamicHistoryInputStream.java>
• BD0t: End of file reached. <ExtendedDataInputStream.java>
• BD0u: The stream has not been marked. <ExtendedDataInputStream.java>
• BD0v: Exceeded the number of bytes specified by mark. <ExtendedDataInputStream.java>
• BD0w: Unhandled endianess. <ExtendedDataOutputStream.java>
  • The endianess
• BD0x: Cannot align to zero or a negative amount. <ExtendedDataOutputStream.java>
• BD0y: Byte value out of range. <ExtendedDataOutputStream.java>
• BD0z: Short value out of range. <ExtendedDataOutputStream.java>
• BD10: Unsigned byte value out of range. <ExtendedDataOutputStream.java>
• BD11: Unsigned short value out of range. <ExtendedDataOutputStream.java>
• BD12: The huffman tree was modified in the middle of iteration. <HuffmanTreeInt.java>
• BD13: The symbol exceeds the range of the mask. <HuffmanTreeInt.java>
  • The value
  • The mask
• BD14: The mask has a zero gap between bits or at the least significant end. <HuffmanTreeInt.java>
  • The value
  • The mask
• BD15: Key not found in tree. <HuffmanTreeInt.java>
• BD16: Cannot set the indentation level to a negative value. <IndentedOutputStream.java>
• BD17: Unknown type or the error type was reached. <InflaterInputStream.java>
  • The type code used in the stream
• BD18: Illegal dynamic huffman code. <InflaterInputStream.java>
  • The code.
• BD19: The compressed stream is damaged by being too short or having an illegal tree access. <InflaterInputStream.java>
• BD1a: There may only be at most 19 used code lengths. <InflaterInputStream.java>
  • The number of code lengths
• BD1b: Illegal fixed huffman code. <InflaterInputStream.java>
  • The code.
• BD1c: Value mismatch reading the number of uncompressed symbols that exist. <InflaterInputStream.java>
  • The length
  • The complement
  • The complemented input length
  • The complemented input complement
• BD1d: Window access out of range. <InflaterInputStream.java>
  • The distance
  • The length
• BD1e: Illegal fixed distance code. <InflaterInputStream.java>
  • The distance code
• BD1f: Illegal length code. <InflaterInputStream.java>
  • The length code
• BD1g: Reached EOF while reading bytes to decompress. <InflaterInputStream.java>
  • Bits in the queue
  • Requested number of bits
• BD1h: A repeat code was specified, however this is the first entry. <InflaterInputStream.java>
  • The last length index
• BD1i: Illegal code. <InflaterInputStream.java>
  • The code
• BD1j: Out of bounds index read. <InflaterInputStream.java>
• BD1k: Unexpected end of file while trying to read MIME header. <MIMEFileDecoder.java>
• BD1l: MIME encoded does not start with MIME header. <MIMEFileDecoder.java>
• BD1m: Unexpected EOF while read the MIME file data. <MIMEFileDecoder.java>
• BD1n: The underlying stream has entered the error state. <PrintStreamWriter.java>
• BD1o: The limit is negative. <SizeLimitedInputStream.java>
  • The negative limit
• BD1p: Reached EOF on wrapped stream when requesting an exact number of bytes. <SizeLimitedInputStream.java>
  • The current read count
  • The read limit
• BD1q: Required an exact number of bytes however the limit was not yet reached, the input stream is too short. <SizeLimitedInputStream.java>
  • The limit
  • The current position
• BD1r: Required an exact number of bytes however the limit was not yet reached, the file is too short. <SizeLimitedInputStream.java>
  • The limit
  • The current position
• BD1s: Required an exact number of bytes however the limit was not yet reached. <SizeLimitedInputStream.java>
  • The limit
  • The current position
• BD1t: Zero or negative window size specified. <SlidingByteWindow.java>
  • The window size
• BD1u: Bulk read of window bytes would exceed the bounds of the window. <SlidingByteWindow.java>
  • The bytes in the past to start the copy from
  • The number of bytes to read
  • The total number of bytes in the window
• BD1v: Get of a sliding window read did not read the expected number of bytes. <SlidingByteWindow.java>
  • The expected number of bytes to read
  • The actual number read
• BD1w: The checksum for the ZLib stream is not valid. <ZLibDecompressor.java>
  • The desired checksum
  • The actual checksum
• BD1x: Only deflate compressed ZLib streams are supported. <ZLibDecompressor.java>
  • The compression method used
• BD1y: The specified binary logarithm specified for the sliding window is not valid. <ZLibDecompressor.java>
  • The binary logarithm of the sliding window
• BD1z: The checksum for the starting ZLib header is not a multiple of 31. <ZLibDecompressor.java>
  • The checksum remainder
• BD20: Preset dictionaries in ZLib streams are not supported. <ZLibDecompressor.java>
• BD20: Read EOF from input when there were expected to be more characters or the ending padding character. <MIMECharDecoder.java>
  • The bits in the buffer
• BD21: Did not expect a padding character. <MIMECharDecoder.java>
  • The number of decoded bits in queue
• BD21: The block size of the data deque is not a power of two. <ByteDeque.java>
  • The specified block size
• BD22: Expected another padding character. <MIMECharDecoder.java>
• BD22: Negative deque capacity specified. <ByteDeque.java>
• BD23: Adding bytes to the start would exceed the capacity of the queue. <ByteDeque.java>
• BD23: Unexpected end of file while trying to read MIME header. <MIMEFileDecoder.java>
• BD24: Adding bytes to the end would exceed the capacity of the queue. <ByteDeque.java>
• BD24: MIME encoded does not start with MIME header. <MIMEFileDecoder.java>
• BD25: Attempt to delete starting from a negative address. <ByteDeque.java>
• BD25: Unexpected EOF while read the MIME file data. <MIMEFileDecoder.java>
• BD26: Request get at a negative index. <ByteDeque.java>
• BD27: Could not get the byte at the given position because it exceeds the deque bounds. <ByteDeque.java>
  • The index
• BD28: Request get at a negative index. <ByteDeque.java>
• BD29: The requested address is outside of the bounds of the queue. <ByteDeque.java>
  • The requested address
  • The number of bytes in the queue
• BD2a: Could not get the first byte because the deque is empty. <ByteDeque.java>
• BD2b: Could not remove the last byte because the deque is empty. <ByteDeque.java>
• BD2c: Could not remove the first byte because the deque is empty. <ByteDeque.java>
• BD2d: Could not remove the last byte because the deque is empty. <ByteDeque.java>
• BD2e: Request set at a negative index. <ByteDeque.java>
• BD2f: Could not set the byte at the given position because it exceeds the deque bounds. <ByteDeque.java>
  • The index
• BD2g: Request set at a negative index. <ByteDeque.java>
• BD2h: The requested address is outside of the bounds of the queue. <ByteDeque.java>
  • The requested address
  • The number of bytes in the queue
• BD3h: Zero or negative size section. <TableSectionOutputStream.java>
  • The size
• BD3i: Could not create the byte array. <TableSectionOutputStream.java>
• BD3j: Negative padding. <TableSectionOutputStream.java>
  • The padding
• BD3k: Cannot align to a negative amount. <TableSectionOutputStream.java>
  • The alignment
• BD3l: Zero or negative size. <TableSectionOutputStream.java>
  • The size
• BD3m: Size of section exceeded. <TableSectionOutputStream.java>
  • The size of the section
• BD3n: Unsigned short value out of range. <TableSectionOutputStream.java>
  • The value
• BD3o: Signed short value out of range. <TableSectionOutputStream.java>
  • The value
• BD3p: Size of section exceeded. <TableSectionOutputStream.java>
• BD3q: Zero or negative alignment. <TableSectionOutputStream.java>
  • The alignment

BE -- runt/mids/squirrel-quarrel

• BE01: Invalid initial settings magic number. <InitialSettings.java>
  • The read magic number
• BE02: Failed to rea/write something. <MainMidlet.java>
• BE03: Failed to read the image data for the specified file. <MegaTileCacher.java>
  • The terrain type
• BE04: Player index out of range. <PlayerColor.java>
  • The player index
• BE05: Invalid player index. <Players.java>
  • The index
• BE06: The game screen which was requested is outside of the player bounds. <SplitScreen.java>
• BE07: The viewport cannot have a negative size. <Viewport.java>
• BE08: Cannot set the viewport size to be zero or negative. <Viewport.java>
• BE09: Unknown unit size. <BaseUnitInfo.java>
  • Unit size
• BE0a: Cannot morph a linked unit. <Unit.java>
• BE0b: Unit information for the given unit does not exist. <UnitType.java>
  • The unit
• BE0c: Could not load unit information. <UnitType.java>
• BE0d: Dimension must start and end with square brackets. <Dimension.java>
  • The input string
• BE0e: Dimension must have a comma between the units. <Dimension.java>
  • The input string
• BE0f: Floating point operations not supported. <GameRandom.java>
• BE0g: Point must start and end with parenthesis. <Point.java>
  • The input string
• BE0h: Point must have a comma between the units. <Point.java>
  • The input string
• BE0i: Could not read byte from the input. <ReplayInputStream.java>
• BE0j: Could not read integer from the input. <ReplayInputStream.java>
• BE0k: Could not read long from the input. <ReplayInputStream.java>
• BE0l: Could not write the byte value. <ReplayOutputStream.java>
  • The value to write
• BE0m: Could not write the integer value. <ReplayOutputStream.java>
  • The value to write
• BE0n: Could not write the long value. <ReplayOutputStream.java>
  • The value to write
• BE0o: Cannot get terrain because the tile is out of range. <MegaTile.java>
• BE0p: Could not get the tile image for the given terrain. <TerrainType.java>
  • The terrain type
• BE0q: Megatile not in level range. <World.java>
• BE0r: Negative or zero players, there must be at least one player. <TileMap.java>
  • The player count
• BE0s: Out of range player count. <GameBuilder.java>
  • The count
• BE0t: Could not cache the image. <TileMap.java>
  • The index
  • The prefix
• BE0u: Invalid player index. <PlayerIndex.java>

BF -- runt/libs/zip

• BF01: Byte index is not within bounds. <IBM437CodePage.java>
  • The byte
• BF02: Decompressing using the given method is not supported. <ZipCompressionType.java>
  • The current compression method
• BF03: Compressing using the given compression algorithm is not supported. <ZipCompressionType.java>
  • The compression algorithm
• BF04: Cannot read from a negative offset. <ArrayBlockAccessor.java>
• BF05: Read past end of the block. <ArrayBlockAccessor.java>
• BF06: Cannot read from a negative offset. <ArrayBlockAccessor.java>
• BF07: Cannot read from a negative offset. <FileChannelBlockAccessor.java>
• BF08: Read past end of file. <FileChannelBlockAccessor.java>
• BF09: Cannot read from a negative offset. <FileChannelBlockAccessor.java>
• BF0a: Cannot open the entry because it is a directory. <ZipBlockEntry.java>
  • The name of the entry
• BF0b: Could not read the central directory data. <ZipBlockEntry.java>
• BF0c: Cannot open the entry because it uses too new of a version. <ZipBlockEntry.java>
  • The version number
• BF0d: Could not read the local file header from the ZIP file. <ZipBlockEntry.java>
• BF0e: The magic number for the local file header is not valid. <ZipBlockEntry.java>
• BF0f: Unknown compression method for entry. <ZipBlockEntry.java>
  • The method identifier
• BF0g: Could not read the name of the entry. <ZipBlockEntry.java>
• BF0h: Could not read the central directory data. <ZipBlockEntry.java>
• BF0i: Could not read the file name. <ZipBlockEntry.java>
• BF0j: The central directory is larger than the ZIP file, the ZIP is truncated. <ZipBlockReader.java>
  • The central directory size
  • The size of the ZIP file
• BF0k: The base address of the ZIP file exceeds the bound of the ZIP file. <ZipBlockReader.java>
  • The central directory size
  • The size of the ZIP file
• BF0l: Could not find the entry with the specified name. <ZipBlockReader.java>
  • The name of the entry
• BF0m: The specified entry does not exist within the ZIP file. <ZipBlockReader.java>
  • The entry name
• BF0n: Central directory extends past the end of the file. <ZipBlockReader.java>
  • The current entry
  • The current read position
  • The size of the file
• BF0o: The entry does not have a valid magic number. <ZipBlockReader.java>
  • The entry index
• BF0p: The file is too small to be a ZIP file. <ZipBlockReader.java>
  • The size of file
• BF0q: Could not find the end of the central directory in the ZIP file. <ZipBlockReader.java>
• BF0r: The start position and length cannot be negative. <__BlockAccessorRegionInputStream__.java>
• BF0s: CRC mismatch. (The expected CRC; The calculated CRC; The number of read bytes <__CRCInputStream__.java>
• BF0t: CRC mismatch. (The expected CRC; The calculated CRC; The number of read bytes <__CRCInputStream__.java>
• BF0u: Reached end of file in the entry however the size it consumes and/or its CRC does not match the expected values. <ZipStreamEntry.java>
  • The expected CRC
  • The actual CRC
  • The expected uncompressed size
  • The actual uncompressed size
  • The expected compressed size
  • The actual compressed size
• BF0v: Could not find end of entry because the entry exceeds the bounds of the ZIP file. <ZipStreamEntry.java>
  • The number of read bytes
• BF0w: Reached end of file in the entry however the size it consumes and/or its CRC does not match the expected values. <ZipStreamEntry.java>
  • The expected CRC
  • The actual CRC
  • The expected uncompressed size
  • The actual uncompressed size
  • The expected compressed size
  • The actual compressed size
• BF0x: Could not find end of entry because the entry exceeds the bounds of the ZIP file. <ZipStreamEntry.java>
  • The number of read bytes
• BF0y: Reached end of file before the end of the ZIP entry could be found. <ZipStreamEntry.java>
• BF0z: An entry is currently being read, it must first be closed. <ZipStreamReader.java>
• BF10: Could not peek the magic number. <ZipStreamReader.java>
• BF11: Zip version not suppored. <ZipStreamReader.java>
  • The version
• BF12: Encrypted entries not supported. <ZipStreamReader.java>
• BF13: Compression method not supported. <ZipStreamReader.java>
  • The method
• BF14: Entry exceeds 2GiB in size. <ZipStreamReader.java>
  • The compressed size
  • The uncompressed size
• BF15: Close of an incorrect entry. <ZipStreamReader.java>
• BF16: Cannot close the ZIP writer because an entry is still being written. <ZipStreamWriter.java>
• BF17: Cannot write new entry because the ZIP has been closed. <ZipStreamWriter.java>
• BF18: Cannot create a new entry for output because the previous entry has not be closed. <ZipStreamWriter.java>
• BF19: A ZIP file cannot have more than 65536 entries. <ZipStreamWriter.java>
• BF1a: The length of the input file exceeds 65535 UTF-8 characters. <ZipStreamWriter.java>
  • The filename length
• BF1b: Cannot close entry because a current one is not being used. <ZipStreamWriter.java>
• BF1c: Either one or both of the compressed or uncompressed file sizes exceeds 4GiB. <ZipStreamWriter.java>
  • The uncompressed size
  • The compressed size
• BF1d: Cannot write a single byte because the stream is closed. <ZipStreamWriter.java>
• BF1e: Cannot write a single byte because the ZIP entry would exceed 4GiB. <ZipStreamWriter.java>
• BF1f: Cannot write multiple bytes because the stream is closed. <ZipStreamWriter.java>
• BF1g: Cannot write multiple bytes because the ZIP entry would exceed 4GiB. <ZipStreamWriter.java>

BI -- runt/libs/tool-packfile

• BI01: Could not minimize the JAR due to an invalid class file. <PackMinimizer.java>
  • The name

BK -- runt/libs/springcoat-vm

• BK01: Attempt to allocate an array of a negative size. <SpringArrayObject.java>
  • The length requested
• BK02: Out of bounds access to array. <SpringArrayObjectBoolean.java>
  • The index
  • The length of the array
• BK03: Could not set the index in the boolean array. <SpringArrayObjectBoolean.java>
• BK04: Out of bounds access to array. <SpringArrayObjectBoolean.java>
  • The index
  • The length of the array
• BK05: Out of bounds access to array. <SpringArrayObjectByte.java>
  • The index
  • The length of the array
• BK06: Could not set the index in the char array. <SpringArrayObjectByte.java>
• BK07: Out of bounds access to array. <SpringArrayObjectByte.java>
  • The index
  • The length of the array
• BK08: Out of bounds access to array. <SpringArrayObjectChar.java>
  • The index
  • The length of the array
• BK09: Could not set the index in the char array. <SpringArrayObjectChar.java>
• BK0a: Out of bounds access to array. <SpringArrayObjectChar.java>
  • The index
  • The length of the array
• BK0b: Out of bounds access to array. <SpringArrayObjectDouble.java>
  • The index
  • The length of the array
• BK0c: Could not set the index in the double array. <SpringArrayObjectDouble.java>
• BK0d: Out of bounds access to array. <SpringArrayObjectDouble.java>
  • The index
  • The length of the array
• BK0e: Out of bounds access to array. <SpringArrayObjectFloat.java>
  • The index
  • The length of the array
• BK0f: Could not set the index in the float array. <SpringArrayObjectFloat.java>
• BK0g: Out of bounds access to array. <SpringArrayObjectFloat.java>
  • The index
  • The length of the array
• BK0h: Out of bounds access to array. <SpringArrayObjectGeneric.java>
  • The index
  • The length of the array
• BK0i: The specified type is not compatible with the values this array stores. <SpringArrayObjectGeneric.java>
  • The input value
  • The component type
• BK0j: Out of bounds access to array. <SpringArrayObjectGeneric.java>
  • The index
  • The length of the array
• BK0k: Out of bounds access to array. <SpringArrayObjectInteger.java>
  • The index
  • The length of the array
• BK0l: Could not set the index in the char array. <SpringArrayObjectInteger.java>
• BK0m: Out of bounds access to array. <SpringArrayObjectInteger.java>
  • The index
  • The length of the array
• BK0n: Out of bounds access to array. <SpringArrayObjectLong.java>
  • The index
  • The length of the array
• BK0o: Could not set the index in the long array. <SpringArrayObjectLong.java>
• BK0p: Out of bounds access to array. <SpringArrayObjectLong.java>
  • The index
  • The length of the array
• BK0q: Out of bounds access to array. <SpringArrayObjectShort.java>
  • The index
  • The length of the array
• BK0r: Could not set the index in the short array. <SpringArrayObjectShort.java>
• BK0s: Out of bounds access to array. <SpringArrayObjectShort.java>
  • The index
  • The length of the array
• BK0t: Duplicated method in class. <SpringClass.java>
  • The method
• BK0u: Duplicated field in class. <SpringClass.java>
  • The field
• BK0v: The specified field does not exist. <SpringClass.java>
  • The class which was looked in
  • The name and type of the field
• BK0w: The specified field exists in the class however it does not match being static. <SpringClass.java>
  • The class the field is in
  • The name and type of the method
  • If a static field was requested
• BK0x: The specified method does not exist. <SpringClass.java>
  • The class which was looked in
  • The name and type of the method
• BK0y: The specified method exists in the class however it does not match being static. <SpringClass.java>
  • The class the method is in
  • The name and type of the method
  • If a static method was requested
• BK0z: The specified method does not exist, when non-virtual lookup is used. <SpringClass.java>
  • The class which was looked in
  • The name and type of the method
• BK10: Non-virtual method lookup found a static method. <SpringClass.java>
  • The class being looked in
  • The name and type requested
• BK11: Class attempted to be initialized twice. <SpringClass.java>
  • This class
• BK12: Could not load class. <SpringClassLoader.java>
  • The class to load
• BK13: Failed to read from the class path. <SpringClassLoader.java>
• BK14: Could not locate the specified class. <SpringClassLoader.java>
  • The class which was not found
  • The class file which was attempted to be located
• BK15: Could not read from the source class file. <SpringClassLoader.java>
  • The class being read
• BK16: The class is not formatted correctly. <SpringClassLoader.java>
  • The class being read
• BK17: Negative field index. <SpringField.java>
• BK18: Attempt to write to final field. <SpringFieldStorage.java>
• BK19: Could not locate the static field storage? <SpringMachine.java>
• BK1a: Entry point JAR has no manifest. <SpringMachine.java>
  • The name of the boot binary
• BK1b: Failed to read the manifest. <SpringMachine.java>
• BK1c: This thread does not own the monitor. <SpringMonitor.java>
• BK1d: No previous entry call was made. <SpringMonitor.java>
  • The monitor entry count
• BK1e: Cannot obtain the monitor of an object that is null. <SpringNullObject.java>
• BK1f: Reference types are special and have no monitor. <SpringPrimitiveReference.java>
• BK1g: Reference types are special and have no class. <SpringPrimitiveReference.java>
• BK1h: Entry point JAR has no manifest. <SpringTaskManager.java>
• BK1i: Failed to read the manifest. <SpringTaskManager.java>
• BK1j: Stack overflow. <SpringThread.java>
• BK1k: Cannot enter the frame for a method which is abstract. <SpringThread.java>
  • The class the method is in
  • The method name and type
• BK1l: Cannot enter a synchronized static method without a thread working, since we need to load the class object. <SpringThread.java>
• BK1m: Cannot enter a synchronized instance method with no arguments passed. <SpringThread.java>
• BK1n: Cannot enter a monitor of nothing or a non-object. <SpringThread.java>
• BK1o: No frames to pop. <SpringThread.java>
• BK1p: Cannot push local variable to the stack because it of the incorrect type. <SpringThread.java>
  • The varible to push
  • The index to load from
  • The expected class
  • The value to push
  • The type of value to push
• BK1q: Stack underflow. <SpringThread.java>
  • The current top of the stack
  • The stack limit
• BK1r: Popped a null value of the stack, which should not occur. <SpringThread.java>
• BK1s: Expected long or double below top entry in stack. <SpringThread.java>
  • The current top of the stack
  • The stack limit
• BK1t: Popped the wrong kind of value from the stack. <SpringThread.java>
  • The popped type
  • The expected type
• BK1u: Did not expect a null value to be popped from the stack. <SpringThread.java>
• BK1v: Popped the wrong kind of value from the stack. <SpringThread.java>
  • The popped type
  • The expected type
• BK1w: Stack overflow pushing value. <SpringThread.java>
  • The value
  • The current top of the stack
  • The stack limit
• BK1x: Thread already has a worker associated with it. <SpringThreadWorker.java>
• BK1y: Do not know how to convert the given virtual machine array to a native machine array. <SpringThreadWorker.java>
  • The input class
• BK1z: Do not know how to convert the given virtual machine class to a native machine object. <SpringThreadWorker.java>
  • The input class
• BK20: Do not know how to convert the given class to a native machine object. <SpringThreadWorker.java>
  • The input class
• BK21: Do not know how to convert the given class to a virtual machine object. <SpringThreadWorker.java>
  • The input class
• BK22: Cannot wrap this as a native array. <SpringThreadWorker.java>
  • The input class type
• BK23: Current frame is not our blank frame. <SpringThreadWorker.java>
• BK24: Could not reverse class object to class name. <SpringThreadWorker.java>
• BK25: Unknown native function. <SpringThreadWorker.java>
  • The native function
• BK26: Could not access the specified class. <SpringThreadWorker.java>
  • The class to access
  • The context class
• BK27: Cannot have a negative frame limit. <SpringThreadWorker.java>
  • The frame limit
• BK28: Could not access the target class for instance field access. <SpringThreadWorker.java>
  • The field reference
• BK29: Could not access the target field for instance field access. <SpringThreadWorker.java>
  • The field reference
  • The field flags
• BK2a: Could not access the target class for static field access. <SpringThreadWorker.java>
  • The field reference
• BK2b: Could not access the target field for static field access. <SpringThreadWorker.java>
  • The field reference
• BK2c: Execution seems to be stuck in this method. <SpringThreadWorker.java>
• BK2d: Cannot cast object to the target type. <SpringThreadWorker.java>
  • The type to cast to
  • The type of the object
• BK2e: Cannot duplicate category two type. <SpringThreadWorker.java>
• BK2f: Cannot duplicate and place down below with two type. <SpringThreadWorker.java>
• BK2g: Cannot duplicate cat2 type. <SpringThreadWorker.java>
• BK2h: Cannot duplicate top most entry and place two down because a cat2 type is in the way. <SpringThreadWorker.java>
• BK2i: Cannot duplicate top two values. <SpringThreadWorker.java>
• BK2j: Expected category one type. <SpringThreadWorker.java>
• BK2k: Cannot duplicate value below category two type. <SpringThreadWorker.java>
• BK2l: Cannot pop cat2 type for dup. <SpringThreadWorker.java>
• BK2m: Category two type cannot be on the bottom. <SpringThreadWorker.java>
• BK2n: Bottommost entry cannot be cat2 type. <SpringThreadWorker.java>
• BK2o: Cannot read value from null reference. <SpringThreadWorker.java>
• BK2p: Cannot read value from this instance because it not a simple object. <SpringThreadWorker.java>
• BK2q: Cannot pop category two value from stack. <SpringThreadWorker.java>
• BK2r: Cannot pop a category one then category two type. <SpringThreadWorker.java>
• BK2s: Cannot store value into null reference. <SpringThreadWorker.java>
• BK2t: Cannot store value into this instance because it not a simple object. <SpringThreadWorker.java>
• BK2u: Cannot store value into a field which belongs to another class. <SpringThreadWorker.java>
• BK2v: Cannot swap category two types. <SpringThreadWorker.java>
• BK2w: Reserved instruction. <SpringThreadWorker.java>
  • The instruction
• BK2x: Unimplemented operation. <SpringThreadWorker.java>
  • The instruction
• BK2y: An exception was thrown in the virtual machine while executing the specified location. <SpringThreadWorker.java>
  • The class
  • The method
  • The program counter
  • The file in source code, null means it is unknown
  • The line in source code, negative values are unknown
  • The instruction
• BK2z: Fatal VM exception. <SpringThreadWorker.java>
• BK30: Could not access the target method for interface invoke. <SpringThreadWorker.java>
  • The target method
• BK31: Instance object for interface invoke is null. <SpringThreadWorker.java>
• BK32: Cannot invoke the method in the object because it is of the wrong type. <SpringThreadWorker.java>
  • The reference class
  • The class of the target object
  • The first argument
• BK33: Virtual machine code executed a fatal Todo. <SpringThreadWorker.java>
  • The To Do code
• BK34: Could not access the target method for special invoke. <SpringThreadWorker.java>
  • The target method
• BK35: Instance object for special invoke is null. <SpringThreadWorker.java>
• BK36: Cannot call private method that is not in the same class. <SpringThreadWorker.java>
  • The method reference
• BK37: Could not access the target method for static invoke. <SpringThreadWorker.java>
  • The target method
• BK38: Could not access the target method for virtual invoke. <SpringThreadWorker.java>
  • The target method
• BK39: Instance object for virtual invoke is null. <SpringThreadWorker.java>
• BK3a: Cannot allocate an instance of the given class because it cannot be accessed. <SpringThreadWorker.java>
  • The class to allocate
• BK3b: StaticMethod does not have a monitor. <SpringVMStaticMethod.java>
• BK3c: StaticMethod does not have a type. <SpringVMStaticMethod.java>
• BK3f: Cannot have a negative length pointer area. <SpringPointerArea.java>
• BK3g: Cannot allocate negative pointer space. <SpringPointerManager.java>
• BK3h: Ran out of address space allocating object. <SpringPointerManager.java>
  • The requested length
• BK3i: Could not find object referenced at the given pointer. <SpringPointerManager.java>
  • The requested address

BM -- bldt/javase/libs/builder-implementation

• BM01: The system property used for the binary path was not specified. <Main.java>
• BM01: Unsupported Java version. <HostCompiler.java>
• BM02: Compilation failed. <HostCompilerRunnable.java>
• BM02: The system property used for the root of the SquirrelJME source tree was not specified. <Main.java>
• BM03: No system Java compiler exists. <StandardCompiler.java>
• BM03: The compiler has failed. <HostCompilerRunnable.java>
• BM04: Only class file output is supported. <HostFileManager.java>
• BM04: Only class file output is supported. <__FileManager__.java>
• BM05: Attempted to open input file as output. <__FileObject__.java>
• BM05: Do not know how to handle getting a file object from the given file name. <HostFileManager.java>
  • The name of the file
• BM06: Could not create a URI for the file. <HostFileObject.java>
• BM06: Could not create a URI for the file. <__FileObject__.java>
• BM07: Attempted to open input file as output. <InputHostFileObject.java>
• BM07: Do not know how to handle getting a file object from the given file name. <__FileManager__.java>
  • The name of the file
• BM08: Cannot open a writer for an input file. <InputHostFileObject.java>
• BM08: This file was opened for output. <__FileObject__.java>
• BM09: Cannot get character content for an output file. <OutputHostFileObject.java>
• BM09: Could not find the directory for the requested file. <__FileManager__.java>
  • The requested file
• BM0a: Cannot open an input stream for an output file. <OutputHostFileObject.java>
• BM0b: Cannot open a reader for an output file. <OutputHostFileObject.java>
• BM0b: Insufficient number of arguments. <HostedLaunch.java>
• BM0c: Failed to read the manifest. <HostedLaunch.java>
• BM0d: The JAR to launch does not specify any midlets and there is no main class. <HostedLaunch.java>
• BM0e: Expected two commas in the MIDlet field. <EntryPoints.java>
• BM0f: Failed to find the main class. <HostedLaunch.java>
• BM0g: Failed to launch the MIDlet. <HostedLaunch.java>
• BM0i: The requested entry point identifier is out of range. <HostedLaunch.java>
  • The entry point identifier

BP -- bldt/libs/palmos-utils

• BP01: Could not write the database. <PalmDatabaseBuilder.java>

BU -- test/libs/tac

• BU01: The specified string cannot be converted to an object because it an unknown representation, the conversion is only one way. <DataDeserialization.java>
  • The encoded data
• BU02: The specified object cannot be decoded because it is not known or does not support decoding. <DataDeserialization.java>
  • The encoded data
• BU03: Test takes two parameters. <TestBiConsumer.java>
• BU04: Test takes two parameters. <TestBiFunction.java>
• BU05: Test takes one parameter. <TestConsumer.java>
• BU06: Test takes one parameter. <TestFunction.java>
• BU07: Not a throwable. <TestResult.java>
• BU08: Test does not take any parameters. <TestRunnable.java>
• BU09: Test does not take any parameters. <TestSupplier.java>
• BU0b: Minimum API level has not been met. <__CoreTest__.java>
  • The required API level
• BU0c: Test could not be ran. <__CoreTest__.java>
  • The given test
• BU0d: The test failed to run properly. <__CoreTest__.java>
  • The given test
• BU0e: Test does not take any parameters. <TestInteger.java>
• BU0e: Test does not take any parameters. <TestLong.java>
• BU0f: Test does not take any parameters. <TestBoolean.java>

DA -- runt/apis/meep-lui

• DA01: Initialization of color values out of range, they must be in the range of 0-255. <DisplayColor.java>
  • Red
  • Green
  • Blue

DC -- runt/apis/meep-rms

• DC01: Cannot write record to read-only store. <RecordStore.java>
• DC02: Could not get the record store time. <RecordStore.java>
• DC03: Error getting list of records. <RecordStore.java>
• DC04: The record does not fit into the output. <RecordStore.java>
• DC05: Could not get the record store version. <RecordStore.java>
• DC06: Cannot write record to read-only store. <RecordStore.java>
• DC07: This record store is not open. if (this._opens <= 0) throw new RecordStoreNotOpenException("DC07"); <RecordStore.java>
• DC08: Cannot delete the specified record store because it does not exist. <RecordStore.java>
  • The name of the store
• DC09: Could not add the record, there might not be enough free space available. <RecordStore.java>
• DC0a: No such record store exists. <RecordStore.java>
• DC0b: No such record exists. <RecordStore.java>
• DC0c: Unknown record store error. <RecordStore.java>
  • Error
• DC0d: The name is not valid. <RecordStore.java>
• DC0e: Could not find the specified record store. <RecordStore.java>
  • The name
  • The vendor
  • The suite
• DC0f: Could not create the record, it is likely that there is not enough space remaining. <RecordStore.java>
• DC0g: Could not rebuild the enumeration. <__VolumeEnumeration__.java>
• DC0h: Record store enumeration has been destoryed. <__VolumeEnumeration__.java>
• DC0i: Could not check for updates. <__VolumeEnumeration__.java>

DG -- runt/apis/meep-swm

• DG0q: The current suite has been removed. <Suite.java>
• DG0r: The given state flag cannot be set. <Suite.java>
  • The state flag
• DG0s: Cannot change flags of the system suite. <Suite.java>
• DG0t: Failed to install the program due to the specified error. <__SuiteTracker__.java>
  • The error code
  • The more detailed message associated with the error
• DG0u: Could not locate the suite which statifies the given dependency. <__SystemSuiteManager__.java>
  • The dependency to look for
• DG0v: Cannot start a non-application suite. <__SystemTaskManager__.java>
• DG0w: Invalid entry point was specified when starting task. <__SystemTaskManager__.java>
  • The entry point
• DG0x: Could not launch the task because of an unspecified error. <__SystemTaskManager__.java>
  • The error

EA -- runt/apis/media-api

• EA01: Null Player has been closed. <NullPlayer.java>
• EA02: Null Player has been closed. <NullPlayer.java>
• EA03: Null Player has been closed. <NullPlayer.java>
• EA04: Null Player has been closed. <NullPlayer.java>
• EA05: Null Player has been closed. <NullPlayer.java>
• EA06: Null Player has been closed. <NullPlayer.java>

EB -- runt/apis/midp-lcdui

• EB01: The specified constraint type is not valid. <EditableText.java>
  • The type
• EB02: The specified constraint flags are not valid. <EditableText.java>
  • The constraint flags
• EB03: The maximum characters in the text field cannot be zero or negative. <EditableText.java>
  • The maximum characters
• EB04: Cannot set the maximum size because the input text field would have an invalid value. <EditableText.java>
• EB05: Cannot set the specified string because it is not valid within the constraints. <EditableText.java>
• EB06: Cannot get the name for the given key code because it is not known. <KeyNames.java>
  • The key code
• EB07: Invalid logical font size. <FontSizeConversion.java>
• EB08: The font does not exist. <SQFFont.java>
  • The name
  • The pixel size
• EB09: Could not load the font data. <SQFFont.java>
  • The name
  • The pixel size
• EB0a: Accelerated graphics operations are not supported for this display. <AcceleratedGraphics.java>
  • The display ID
• EB0b: Invalid width and/or height specified. <AdvancedGraphics.java>
• EB0c: The pitch is less than the width. <AdvancedGraphics.java>
• EB0d: The specified parameters exceed the bounds of the array. <AdvancedGraphics.java>
  • The width
  • The height
  • The offset
  • The pitch
  • The array length
  • The number of elements in the image
• EB0e: Source region for area copy is out of bounds. <AdvancedGraphics.java>
• EB0f: Color out of range. <AdvancedGraphics.java>
  • Alpha
  • Red
  • Green
  • Blue
• EB0g: Cannot set the overlay blending mode because this graphics context does not have the alpha channel. <AdvancedGraphics.java>
• EB0g: Illegal stroke style. <TemplateArrayGraphics.java>
• EB0h: Unknown blending mode. <AdvancedGraphics.java>
• EB0i: Illegal stroke style. <AdvancedGraphics.java>
• EB0j: Invalid graphics function. <GraphicsFunction.java>
  • The function ID
• EB0k: Unknown pixel buffer format. <PixelFormat.java>
  • ID
• EB0l: Illegal region draw. <SerializedGraphics.java>
• EB0m: Failed to set blending mode. <SerializedGraphics.java>
• EB0n: Failed to set stroke style. <SerializedGraphics.java>
• EB0o: Could not serialize the text object. <SerializedGraphics.java>
• EB0p: Could not serialize the text object. <SerializedGraphics.java>
• EB0q: Could not serialize the text object. <SerializedGraphics.java>
• EB0r: Could not serialize the text object. <SerializedGraphics.java>
• EB0s: Could not detect the image format used specified by the starting byte. <ImageReaderDispatcher.java>
  • The magic number
  • The first byte
• EB0t: Illegal PNG magic number. <PNGReader.java>
• EB0u: CRC mismatch in PNG data chunk. <PNGReader.java>
  • Desired CRC
  • Actual CRC
  • Last chunk type read
• EB0v: No image data has been loaded. <PNGReader.java>
• EB0w: Unsupported bit-depth. <PNGReader.java>
  • The bitdepth
• EB0x: Adam7 interlacing not supported. <PNGReader.java>
• EB0y: Paletted PNG image has no palette. <PNGReader.java>
• EB0z: Image has zero or negative width. <PNGReader.java>
  • The width
• EB10: Image has zero or negative height. <PNGReader.java>
  • The height
• EB11: Invalid PNG bit depth. <PNGReader.java>
  • The bit depth
• EB12: Invalid PNG bit depth and color type combination. <PNGReader.java>
  • The color type
  • The bit depth
• EB13: Only deflate compressed PNG images are supported. <PNGReader.java>
  • The compression method
• EB14: Only adapative filtered PNGs are supported. <PNGReader.java>
  • The filter type
• EB15: Unsupported PNG interlace method. <PNGReader.java>
  • The interlace type
• EB16: Unknown filter type. <PNGReader.java>
  • The type
  • The scanline base coordinate
  • The scan line length
  • Image size
• EB17: Could not get the action method of the given class. <ActionMethod.java>
  • The class
• EB18: Could not get the drawing method of the given class. <DrawingMethod.java>
  • The class
• EB19: The specified number of milliseconds is negative. <Alert.java>
  • The number of milliseconds specified
• EB1a: The specified game action is not valid. <Canvas.java>
• EB1b: The image array does not have the same length as the string array. <ChoiceGroup.java>
• EB1c: Invalid choice type specified for a choice group. <ChoiceGroup.java>
  • The choice type
• EB1d: A string element contains a null entry. <ChoiceGroup.java>
• EB1e: Cannot insert choice at the specified index because it is not within bounds. <ChoiceGroup.java>
  • The index to add at
• EB1f: And invalid command type was specified. <Command.java>
  • The command type
• EB1g: Invalid date field mode. <DateField.java>
  • The mode
• EB1h: Unknown color specifier. <Display.java>
  • The color specifier
• EB1i: Unknown activity mode specified. <Display.java>
• EB1j: Cannot show another alert when the alert to show is cleared. <Display.java>
• EB1k: The displayable to show on exit after showing an alert cannot be an alert. <Display.java>
• EB1l: Could not set the alert and its exit displayable because it is already set on a display. <Display.java>
• EB1m: The displayable to be displayed is already being displayed. <Display.java>
• EB1n: Cannot vibrate for a negative duration. <Display.java>
• EB1o: Cannot get the best image size of the specified element. <Display.java>
  • The element specifier
• EB1p: Could not get the display for the specified MIDlet because no displays are available. <Display.java>
• EB1q: No displays are available. <Display.java>
• EB1r: The listener was never added to the listener set. <Display.java>
• EB1s: The display does not support commands. <Displayable.java>
• EB1t: Invalid font style specified. <Font.java>
  • The style
• EB1u: The pixel size of a font cannot be negative. <Font.java>
• EB1v: Invalid font style specified. <Font.java>
  • The style
• EB1w: Invalid font style specified. <Font.java>
  • The style
• EB1x: Invalid font specifiers. <Font.java>
  • The specifiers
• EB1y: Invalid font face specified. <Font.java>
  • The face
• EB1z: Invalid font size specified. <Font.java>
  • The size
• EB20: Could not locate a font by the given name. <Font.java>
  • The font name
• EB21: No font with the given name exists. <Font.java>
  • The font name
• EB22: No font with the given name exists. <Font.java>
  • The font name
• EB23: Cannot append an item which has already be associated with a form. <Form.java>
• EB24: An interactive gauge cannot have a negative maximum value. <Gauge.java>
• EB25: A non-interactive gauge cannot have a negative value that is not indefinite. <Gauge.java>
• EB26: Invalid symbolism for indefinite range. <Gauge.java>
• EB27: Cannot set the label of a gauge associated with an alert. <Gauge.java>
• EB28: Cannot get mutable graphic operations for an immutable image. <Image.java>
• EB29: The source coordinates are negative. <Image.java>
• EB2a: The absolute value of the scanline length exceeds the read width. <Image.java>
• EB2b: Reading of RGB data would exceed the bounds out the output array. <Image.java>
• EB2c: The area to read exceeds the bounds of the image. <Image.java>
• EB2d: Could not load the image data. <Image.java>
• EB2e: Zero or negative image size requested. <Image.java>
• EB2f: The specified resource does not exist. <Image.java>
  • The resource name
• EB2g: Invalid image size. <Image.java>
  • The width
  • The height
• EB2h: The input integer buffer is shorter than the specified area. <Image.java>
• EB2i: The appearance mode is not valid. <ImageItem.java>
  • The appearance mode
• EB2j: String and image elements differ in size. <List.java>
• EB2k: Invalid list type. <List.java>
  • The list type
• EB2l: Cannot add commands for spacers. <Spacer.java>
• EB2m: Cannot set the default command for spacers. <Spacer.java>
• EB2n: Cannot set labels for spacers. <Spacer.java>
• EB2o: The appearance mode is not valid. <StringItem.java>
  • The appearance mode
• EB2p: The width and height cannot be negative for text. <Text.java>
• EB2q: Extent array length must at least be 4. <Text.java>
• EB2r: Text outside of bounds. <Text.java>
  • The starting index
  • The ending index
  • The size of the text
• EB2s: Invalid alignment. <Text.java>
  • The alignment
• EB2t: The height of a font cannot be negative. <Text.java>
• EB2u: The direction to use. <Text.java>
  • The direction
• EB2v: Cannot set the width to a negative value. <Text.java>
• EB2w: Cannot flush the graphics if the buffer is not preserved. <GameCanvas.java>
• EB2x: Commands are not supported. <FullCanvas.java>
• EB2y: Commands are not supported. <FullCanvas.java>
• EB2z: Cannot blink for a negative duration. <DeviceControl.java>
• EB30: Cannot blink for a negative duration. <Display.java>
• EB31: Only light number zero is supported. <DeviceControl.java>
  • The light number
• EB32: Light level out of range. <DeviceControl.java>
  • The level
• EB33: Cannot vibrate for a negative duration. <DeviceControl.java>
• EB34: Frequency out of range. <DeviceControl.java>
  • The frequency
• EB35: Invalid preferred size requested. <Item.java>
• EB36: Cannot set preferred size of item within an alert. <Item.java>
• EB37: Minimum height must be implemented. <Item.java>
  • The class name
• EB38: Minimum width must be implemented. <Item.java>
  • The class name
• EB39: Could not get the item drawing method of the given class. <DrawingItemMethod.java>
  • The class
• EB3a: Unknown frame buffer pixel buffer format. (ID <PixelFormat.java>
• EB3b: Unknown control property. <VirtualFramebuffer.java>
• EBT0: Invalid width and/or height specified. <TemplateArrayGraphics.java>
• EBT1: The pitch is less than the width. <TemplateArrayGraphics.java>
• EBT2: The specified parameters exceed the bounds of the array. <TemplateArrayGraphics.java>
  • The pitch
  • The height
  • The offset
  • The pitch
  • The array length
  • The number of elements in the image
• EBT4: Color out of range. <TemplateArrayGraphics.java>
  • Alpha
  • Red
  • Green
  • Blue
• EBT5: Unknown blending mode. <TemplateArrayGraphics.java>
• EBT6: Cannot set the overlay blending mode because this graphics context does not have the alpha channel. <TemplateArrayGraphics.java>
• EBT7: The input palette does not have enough entries to store color information. <TemplateArrayGraphics.java>

EC -- runt/apis/gcf

• EC01: Path contains invalid character. <FileAddress.java>
  • The path
• EC02: HTTP address must start with double slash. <HTTPAddress.java>
  • The URI part
• EC03: Cannot access the request if (this.tracker._state != HTTPState.SETUP) { Clear before it is thrown this._request = null; Toss throw new IOException("EC03"); <HTTPClientConnection.java>
• EC04: Cannot flush closed HTTP stream. <HTTPRequestBuilder.java>
• EC05: Cannot write more HTTP data. <HTTPRequestBuilder.java>
• EC06: Cannot write more HTTP data. <HTTPRequestBuilder.java>
• EC07: Invalid content length. <HTTPResponse.java>
• EC08: The HTTP body was too small. <HTTPResponse.java>
  • The read length
  • The expected size
• EC09: Invalid status line. <HTTPResponseHeader.java>
  • The line
• EC0a: Invalid HTTP status code. <HTTPResponseHeader.java>
  • Line
• EC0b: Invalid header pair. <HTTPResponseHeader.java>
  • The line
• EC0c: IP port out of range. <IPAddress.java>
  • The port
• EC0d: No IP address was specified. <IPAddress.java>
• EC0e: IPv6 address must end in bracket. <IPAddress.java>
  • The hostname
• EC0f: Hostname has an invalid character. <IPAddress.java>
  • The hostname
• EC0g: IP Address must start with double slash. <IPAddress.java>
  • The URI part
• EC0h: Invalid port number. <IPAddress.java>
  • The URI part
• EC0i: Host name resolution not supported. <NullIPConnectionFactory.java>
• EC0j: TCP client connections are not supported. <NullIPConnectionFactory.java>
• EC0k: The connection could not be closed properly. <TCPClientConnection.java>
• EC0l: The input has been closed. <TCPClientConnection.java>
• EC0m: The output has been closed. <TCPClientConnection.java>
• EC0n: Invalid socket option. <TCPClientConnection.java>
  • The option
• EC0o: Linger cannot be negative. <TCPClientConnection.java>
  • The requested linger
• EC0p: Send/receive buffer size cannot be negative. <TCPClientConnection.java>
  • The requested buffer size
• EC0q: Timeout cannot be negative. <TCPClientConnection.java>
  • The requested timeout
• EC0r: The input has been closed. <TrackedInputStream.java>
• EC0s: The input has been closed. <TrackedInputStream.java>
• EC0t: The input has been closed. <TrackedInputStream.java>
• EC0u: The input has been closed. <TrackedInputStream.java>
• EC0v: The output has been closed. <TrackedOutputStream.java>
• EC0w: The output has been closed. <TrackedOutputStream.java>
• EC0x: The output has been closed. <TrackedOutputStream.java>
• EC0y: The output has been closed. <TrackedOutputStream.java>
• EC0z: The specified URI is not an input connection. <Connector.java>
  • The URI
• EC10: The specified URI is not an output connection. <Connector.java>
  • The URI
• EC11: The URI does not have a scheme. <Connector.java>
  • The URI
• EC12: Unhandled URI protocol. <Connector.java>
  • The URI

EJ -- runt/apis/opengles

• EJ01: The specified class type cannot be used as a display for OpenGL ES graphics. <DefaultDisplay.java>
  • The class type
• EJ02: No display was specified for choosing a configuration. <DefaultEGL.java>
• EJ03: The array containing the number of configurations written has a length of zero. <DefaultEGL.java>
• EJ04: Requested more configurations than what may be output. <DefaultEGL.java>
• EJ05: The attribute list does not end with EGL_NONE. <DefaultEGL.java>
• EJ06: No native display was specified when obtaining an OpenGL ES display. <DefaultEGL.java>
• EJ07: No display was specified. <DefaultEGL.java>
• EJ08: An output version was specified, however it has a length lower than two. <DefaultEGL.java>
• EJ09: Cannot query string a null display. <DefaultEGL.java>
• EJ0a: Cannot get the GL instance of a null context. <EGL10.java>

JC -- runt/libs/tool-classfile

• JC01: Length of class file does not match length of array. <MinimizedClassFile.java>
  • The file length
  • The array length
• JC02: End of file magic number is invalid. <MinimizedClassFile.java>
  • The read magic number
• JC03: End of file reached before parsing the file. <MinimizedClassFile.java>
• JC04: Invalid minimized class magic number. <MinimizedClassHeader.java>
  • The magic number
• JC05: Could not read field data. <MinimizedField.java>
• JC06: Could not read method data. <MinimizedMethod.java>
• JC07: Input arrays are of a different length. <MinimizedPool.java>
  • The expected length
• JC08: First pool entry type is not zero. <MinimizedPool.java>
  • The type that was read
• JC09: Pool uneven padding byte was not 255. <MinimizedPool.java>
  • The value it was
  • The following byte
• JC0a: Invalid read of pool data. <MinimizedPool.java>
• JC0b: NULL pool entry is only permitted as the first type, the class file is corrupt. <MinimizedPool.java>
• JC0c: Invalid read of pool data. <MinimizedPool.java>
• JC0d: Cannot add the specified entry to the constant pool. <MinimizedPoolBuilder.java>
  • The class type
• JC0e: Unknown pool type. <MinimizedPoolEntryType.java>
  • The type
• JC0f: Class does not map to a pool entry type. <MinimizedPoolEntryType.java>
  • The class
• JC0j: Error during translation of the specified method. <Minimizer.java>
  • The current class
  • The method
• JC0k: IOException translating code. <Minimizer.java>
• JC0l: 15-bit integer out of range. <Minimizer.java>
  • The value
  • The instruction index
  • The invalid instruction
• JC0m: Could not minimize class due to a read or write error. <Minimizer.java>
• JC0n: Variable unsigned short out of range. <Minimizer.java>
  • The value
• JC0o: Unsigned short out of range. <Minimizer.java>
  • The value
• JC0p: Could not process the method. <__TempMethods__.java>
  • The method this stopped at
• JC0q: Operation has an incorrect number of arguments. <NativeCodeBuilder.java>
  • The instruction
• JC0r: Use of register which is out of range of the maximum register count. <NativeCodeBuilder.java>
  • The instruction
• JC0s: Cannot jump to a non-label. <NativeCodeBuilder.java>
  • The instruction
• JC0t: May only do math on integer. <NativeCodeBuilder.java>
• JC0u: May only do math on integer. <NativeCodeBuilder.java>
• JC0v: Cannot access wide memory. <NativeCodeBuilder.java>
• JC0w: Cannot access wide memory. <NativeCodeBuilder.java>
• JC0x: Cannot access wide memory. <NativeCodeBuilder.java>
• JC0y: Cannot access wide memory. <NativeCodeBuilder.java>
• JC0z: The specified label was never defined. <NativeCodeBuilder.java>
  • The label
• JC10: Unknown instruction argument count. <NativeInstruction.java>
• JC11: Invalid operation. <NativeInstruction.java>
  • The operation
• JC12: Enqueues were not cleared, this is an internal compiler error. <NearNativeByteCodeHandler.java>
• JC13: Register to remove was never previously returned or was removed multiple times. <VolatileRegisterStack.java>
  • The register
• JC14: Unknown access time. <FieldAccessTime.java>
  • The index
• JC15: Unknown access type. <FieldAccessType.java>
  • The index
• JC16: Unknown invocation type. <InvokeType.java>
  • The index
• JC17: Failed to process the byte code, this may be due to an invalid class or an internal compiler error. <ByteCodeProcessor.java>
  • The last processed instruction
• JC18: No recorded stack state for this position. <ByteCodeProcessor.java>
  • The address to check
• JC19: Cannot compare float or double. <ByteCodeProcessor.java>
• JC1a: Cannot compare float or double. <ByteCodeProcessor.java>
• JC1b: Invalid compare operation. <CompareType.java>
• JC1c: Invalid data type. <DataType.java>
• JC1d: Expected colon in function form. <JavaStackShuffleType.java>
• JC1e: Local variables cannot be an alias of another variable. <JavaStackState.java>
  • The local
• JC1f: Stack variables cannot alias variables at higher indexes. <JavaStackState.java>
  • The stack variable
• JC1g: A collision cannot be made where the length of the stack differs. <JavaStackState.java>
  • The length of the source stack
  • The length of the target stack
• JC1h: Load of local with no value. <JavaStackState.java>
  • The index
  • The information about the source
• JC1i: Stack would overflow loading local value. <JavaStackState.java>
• JC1j: Cannot write over a local variable which is read-only. <JavaStackState.java>
  • The local
• JC1k: Cannot write over a local variable which is read-only. <JavaStackState.java>
  • The local
• JC1l: Cannot pop a negative number of entries. <JavaStackState.java>
• JC1m: Cannot push nothing or top type. <JavaStackState.java>
• JC1n: Stack underflow. <JavaStackState.java>
• JC1o: Stack overflow. <JavaStackState.java>
  • Top
  • Limit
• JC1p: A transition cannot be made where the length of the stack differs. <JavaStackState.java>
  • The length of the source stack
  • The length of the target stack
• JC1q: Could not find a match for performing shuffled stack operations. <JavaStackState.java>
• JC1r: Invalid math operation. <MathType.java>
• JC1s: Invalid stack Java type. <StackJavaType.java>
• JC1t: Duplicate key within annotation. <Annotation.java>
  • The key
• JC1u: Annotation type is not correct. <Annotation.java>
  • The type
• JC1v: Invalid tag specified in annotation. <Annotation.java>
  • The tag used
• JC1w: Duplicate annotation declared. <AnnotationTable.java>
  • The declared annotation
• JC1x: Attributes with a size larger than two gigabytes are not supported. <AttributeTable.java>
• JC1y: The specified code length is not valid. <ByteCode.java>
  • The code length
• JC1z: The operation exceeds the bounds of the method byte code. <ByteCode.java>
  • The operation pointer
  • The operation length
  • The code length
  • The last operation pointer
• JC20: Failed to read from the code attribute. <ByteCode.java>
• JC21: The instruction at the specified address is not valid. <ByteCode.java>
  • The address
• JC22: The instruction at the specified address is not valid. <ByteCode.java>
  • The address
• JC23: Out of bounds read of unsigned short from raw byte code. <ByteCode.java>
  • The address
• JC24: The method owning this byte code has been garbage collected. <ByteCode.java>
• JC25: The wide instruction cannot be the last instruction in a method. <ByteCode.java>
  • The address
• JC26: Unsupported instruction specified in the method byte code. <ByteCode.java>
  • The operation
  • The address
• JC27: Invokedynamic is not supported in this virtual machine. <ByteCode.java>
  • The address
• JC28: Cannot get the length of the specified operation because it is not valid. <ByteCode.java>
  • The operation
  • The address
  • The operation before this one
• JC29: Either Object has a superclass which it cannot extend any class or any other class does not have a super class. Additionally primitive types cannot have a super class. <ClassFile.java>
  • The current class name
  • The super class name
  • Object class name
  • Is this primitive?
• JC2a: Cannot create a special class because it is not an array or primitive type. <ClassFile.java>
  • The descriptor
• JC2b: The magic number for the class is not valid. <ClassFile.java>
  • The read magic number
  • The expected magic number
• JC2c: The version number of the input class file is not valid. <ClassFile.java>
  • The version number
• JC2d: Expected end of the class to follow the attributes in the class. <ClassFile.java>
  • The name of this class
• JC2e: Attribute exceeds 2GiB in length. <ClassFile.java>
  • The size of the attribute
• JC2f: An interface must also be abstract. <ClassFlags.java>
  • The class flags
• JC2g: An interface cannot be final or enum and it must not have the special flag set. <ClassFlags.java>
  • The class flags
• JC2h: Annotations must be interfaces. <ClassFlags.java>
  • The class flags
• JC2i: A class cannot be both abstract and final. <ClassFlags.java>
  • The class flags
• JC2j: Cannot add negative dimensions. <ClassName.java>
• JC2k: This class is not an array, cannot get the component type. <ClassName.java>
  • The name of this class
• JC2l: An address is negative. <ExceptionHandler.java>
  • The start address
  • The end address
  • The handler address
• JC2m: The end address is at or before the start address. <ExceptionHandler.java>
  • The start address
  • The end address
• JC2n: Address is outside of the bounds of the method. <ExceptionHandlerTable.java>
  • The start address
  • The end address
  • The handler address
  • The code length
• JC2o: The constant value is not compatible with the given field type. <Field.java>
  • The value
  • The value type
  • The field type
• JC2p: A duplicate method exists within the class. <Field.java>
  • The method name
  • The method descriptor
• JC2q: The field descriptor cannot be blank. <FieldDescriptor.java>
  • The field descriptor
• JC2r: The field descriptor for a class must end with a semicolon. <FieldDescriptor.java>
  • The field descriptor
• JC2s: The field descriptor is not valid. <FieldDescriptor.java>
  • The field descriptor
• JC2t: Cannot add negative dimensions. <FieldDescriptor.java>
• JC2u: A field cannot be both final and volatile. <FieldFlags.java>
  • The field flags
• JC2v: Flags for interface field has an incorrect set of flags. <FieldFlags.java>
  • The field flags
• JC2w: An undefined flag has been specified. <Flags.java>
  • The extra bitfield flags
• JC2x: The specified identifier contains an invalid character. <Identifier.java>
  • The identifier
• JC2y: Inner class flags are not valid because they would produce invalid standard outer class flags. <InnerClassFlags.java>
  • The flags
• JC2z: Multiple access modifiers, inner classes can only be one or none of private, protected, or public. <InnerClassFlags.java>
  • The flags
• JC31: Invocation of method did not have the matching interface/not-interface attribute. <Instruction.java>
  • The operation
  • The address
  • The method reference
• JC32: Cannot load a constant value which is not of a narrow type. <Instruction.java>
  • The operation
  • The address
  • The constant value
• JC33: Cannot load a constant value which is not of a wide type. <Instruction.java>
  • The operation
  • The address
  • The constant value
• JC34: Unknown type specified for new primitive array. <Instruction.java>
  • The operation
  • The address
  • The type specifier
• JC35: Dimensions represented in type is smaller than the represented dimensions. <Instruction.java>
  • The operation
  • The address
  • The dimensions
• JC36: Pair count for lookup switch is negative. <Instruction.java>
  • The opcode
  • The address
  • The after padded address
  • The read length
• JC37: The operation at the specified address is not supported yet. <Instruction.java>
  • The operation
  • The name of the operation
  • The address it is at
• JC38: Illegal int read off the end of the instruction array. <Instruction.java>
  • The offset
  • The length of the code array
• JC39: Illegal byte read off the end of the instruction array. <Instruction.java>
  • The offset
  • The length of the code array
• JC3a: Illegal short read off the end of the instruction array. <Instruction.java>
  • The offset
  • The length of the code array
• JC3b: Jump target is negative. <InstructionJumpTarget.java>
  • The target
• JC3c: Key and jump table for lookup switch table is of different lengths. <LookupSwitch.java>
• JC3d: Lookup switch key is not in sorted order. <LookupSwitch.java>
  • The index
  • The current key
  • The last key
• JC3e: Could not compile the native code for the given method. <Method.java>
  • The class
  • Method name
  • Method type
• JC3f: A duplicate method exists within the class. <Method.java>
  • The method name
  • The method descriptor
• JC3g: The specified method does not have the correct matching for abstract and if code exists or not. <Method.java>
  • The current class
  • The method name
  • The method type
  • The method flags
• JC3h: Method descriptors must start with an open parenthesis. <MethodDescriptor.java>
  • The method descriptor
• JC3i: Reached end of descriptor parsing arguments. <MethodDescriptor.java>
  • The method descriptor
• JC3j: Unknown field descriptor in method descriptor argument. <MethodDescriptor.java>
  • The descriptor
• JC3k: The method descriptor has no return value. <MethodDescriptor.java>
  • The method descriptor
• JC3l: An abstract method cannot be private, static, final, synchronized, native, or strictfp. <MethodFlags.java>
  • The method flags
• JC3m: Flags for interface method has an incorrect set of flags. <MethodFlags.java>
  • The method flags
• JC3n: Method names cannot contain less than or greater than signs. <MethodName.java>
  • The method name
• JC3o: The specified index is not within the bounds of the constant pool. <Pool.java>
  • The index of the entry
• JC3p: The specified entry's class is not of the expected class. <Pool.java>
  • The index of the entry
  • The class the entry is
  • The expected class
• JC3q: Expected the specified constant pool entry to not be the null entry. <Pool.java>
  • The index
  • The expected class
• JC3r: Modified UTF-8 data is not in the correct format. <Pool.java>
• JC3s: Java ME does not support dynamic invocation (such as method handles or lambda expressions). <Pool.java>
• JC3t: Unknown tag type in the constant pool. <Pool.java>
  • The constant pool tag
• JC3u: The constant pool is not valid. <Pool.java>
• JC3v: The nothing type cannot be initialized. <StackMapTableEntry.java>
  • The type
• JC3w: Non-object types cannot be. uninitialized <StackMapTableEntry.java>
  • The type
• JC3x: The depth of the stack is not within the bounds of the stack. <StackMapTableState.java>
  • The stack depth
  • The stack size
• JC3y: The specified local variable is out of range. <StackMapTableState.java>
  • The index
• JC3z: The specified stack variable is out of range. <StackMapTableState.java>
  • The index
• JC40: The type at the read index does not match the expected type following a wide type. <StackMapTableState.java>
  • The wide type
  • The expected type
  • The actual type
  • The input map
• JC41: Long or double appears at the end of the type array and does not have a top associated with it. <StackMapTableState.java>
• JC42: Table switch high index is less than or equal to the low index. <TableSwitch.java>
  • The low index
  • The high index
• JC43: The arguments that are required for the given method exceeds the maximum number of permitted local variables. <__StackMapParser__.java>
  • The method in question
  • The required number of local variables
  • The maximum number of local variables
• JC44: Unknown StackMapTable verification type. <__StackMapParser__.java>
  • The verification type
• JC45: Failed to parse the stack map table. <__StackMapParser__.java>
• JC46: Appending local variables to the frame however there is no room to place them. <__StackMapParser__.java>
  • The remaining local count
• JC47: Could not chop off all local variables because there are no variables remaining to be chopped. <__StackMapParser__.java>
  • The remaining variables to remove
• JC48: The number of specified local variables in the full frame exceeds the maximum permitted local variable count. <__StackMapParser__.java>
  • The read local variable count
  • The number of locals the method uses
• JC49: The verification tag in the StackMap/StackMapTable attribute is not valid. <__StackMapParser__.java>
  • The tag
• JC4a: Invalid stack map table at the specified address. <__StackMapParser__.java>
  • The address offset
  • Is the address offset absolute?
  • The placement address
  • The type of entry which was just handled, -1 means it was old-style or initial state.
• JC4b: A duplicate stack map information for the specified address has already been loaded. <__StackMapParser__.java>
  • The address
  • The already existing information
  • The information to be placed there
  • Absolute address?
  • Current address of parse
  • The address offset
  • The parsed type
• JC4c: The specified entry already exists within the pool. <BasicPoolBuilder.java>
  • The entry being added
• JC4d: Cannot store the given entry because it not compatible with the static/run-time state. <DualPoolEncoder.java>
  • The pool type
  • The value type
  • Is the run-time pool being processed?
• JC4e: Invalid type in static pool. <DualClassRuntimePoolBuilder.java>
  • The type
• JC4f: Invalid type in runtime pool. <DualClassRuntimePoolBuilder.java>
  • The type
• JC4g: Could not add pool entry because it is not valid. <Minimizer.java>
  • The current instruction
• JC4h: No parent pool was specified. <MinimizedClassFile.java>
• JC4i: Invalid constant pool entry. <DualPoolEncoder.java>
• JC4j: The specified type cannot be within the current pool section. <DualPoolEncoder.java>
  • The type
  • If this is the run-time pool
• JC4k: Duplicated pool entry. <BasicPool.java>
  • The entry
• JC4l: Exceeded maximum permitted registers. <VolatileRegisterStack.java>
  • The base register

NB -- __

• NB01: Illegal character used in project name. <BuildProject.java>
  • The input project name
• NB02: The specified project eventually depends on itself. <BuildProject.java>
  • The project name
• NB03: The entry point project does not exist. <NewBootstrap.java>
• NB04: Failed to compile the bootstrap due to a read/write error. <NewBootstrap.java>
• NB06: The dependency of a given project does not exist. <BuildProject.java>
  • This project
  • The project it depends on
• NB08: Compilation of this project failed. <BuildProject.java>
  • The name of this project
• NB09: Now compiling the specified project. <BuildProject.java>
  • The name of the project being compiled
• NB0a: Merging output JAR file. <NewBootstrap.java>
• NB0b: Expected the entry point boot JAR to be within the merge JAR set. <NewBootstrap.java>
• NB0c: The specified entry has been shaded out, an earlier file is taking priority. <NewBootstrap.java>
  • The entry
  • The base project
  • The current project
• NB0d: Expected the CLDC libraries to be present in the build. <NewBootstrap.java>
• NB20: Could not lookup compiler class. <BootstrapCompiler.java>
• NB21: Could not find the method with the given name in the given class. <BootstrapCompiler.java>
  • The class name
  • The method
• NB22: Could not invoke the given method. <BootstrapCompiler.java>
  • The class name
  • The method name
• NB23: No standard Java compiler exists. <BootstrapCompiler.java>
• NB24: Enumeration constant not found. <BootstrapCompiler.java>
  • The class name
  • The constant name
• NB25: Compiler invocation failed. <BootstrapCompiler.java>
• NB26: No Java compiler found. <BootstrapCompiler.java>
• NB27: Failed to invoke the compiler. <BootstrapCompiler.java>
  • The compiler arguments
• NB82: Could not decode the input string. <MIMECharDecoder.java>

SV -- runt/klib/supervisor

• SV01: Task limit reached. <TaskManager.java>
• SV02: Cannot get the value of a non-enumeration type or it has no implicit values() method. <Enum.java>
• SV03: Not an enumeration value. <Enum.java>
  • The value
• SV05: Cannot add a suppressed exception which is this exception. <Throwable.java>
• SV06: Negative memory blob size. <MemoryBlob.java>
• SV07: Attempt to access resource which was not in range of the boot library. <BootRomLibrary.java>
• SV08: Out of range resource. <ClassPath.java>
• SV09: Out of range region read. <MemoryBlob.java>
• SV0a: Too many entries on the class path. <ClassPath.java>
• SV0b: Cannot enter the monitor of a null object. <JVMFunction.java>
• SV0c: Cannot exit the monitor of a null object. <JVMFunction.java>
• SV0d: Current thread does not have a thread identifier? <JVMFunction.java>
• SV0e: Current thread does not have a thread identifier? <JVMFunction.java>
• SV0f: Current thread does not own the monitor for this object, so it cannot be unlocked. <JVMFunction.java>
• SV0g: Too many monitor exits on objects. <JVMFunction.java>
• SV0h: The owning thread for the object was changed during unlock? <JVMFunction.java>
• SV0i: Garbage collecting an object which is currently locked by a thread. <JVMFunction.java>
• SV0j: Another allocation took the lock from us? <Allocator.java>
• SV0k: Another free took the lock from us? <Allocator.java>
• SV0m: The specified class does not exist and it is not a special class. <Task.java>
  • The class which does not exist
• SV0n: Class information pointer not set. <TaskClass.java>
• SV0o: Cannot get component type of empty class name. <ClassNameUtils.java>
• SV0p: The class name is not an array. <ClassNameUtils.java>
• SV0q: Unknown component type. <ClassNameUtils.java>
• SV0r: Expected class name of array type to end in semi-colon. <ClassNameUtils.java>
• SV0s: String substring is outside of bounds. <String.java>
• SV0t: No root pool was specified and the class pool is purely virtual. <ClassFileParser.java>
• SV0u: Out of range region read. <MemoryBlob.java>
• SV0w: Aliased pool has a count of zero. <AliasedPoolParser.java>
• SV0x: Object allocation is less than the object base size. <TaskAllocator.java>
• SV0y: Malformed array class name. <ClassNameUtils.java>
• SV0z: Invalid primitive type. <TaskClass.java>
• SV10: No such task exists. <TaskManager.java>
  • The task
• SV11: Cannot execute method with the given number of arguments. <TaskThread.java>
• SV12: Cannot execute into a special class type such as an array or primitive type. <TaskThread.java>
• SV13: Class has no default constructor. <Task.java>

ZY -- runt/apis/cldc

• ZY01: The null filesystem only supports a single path element. <NullFileSystem.java>
• ZY02: Additional null path elements must be blank or null. <NullFileSystem.java>

ZZ -- runt/apis/cldc-compact

• ZZ01: Unknown encoding. <CodecFactory.java>
  • The input encoding
• ZZ02: Unknown or unsupported encoding. <CodecFactory.java>
  • The encoding
• ZZ03: Unknown encoding. <CodecFactory.java>
  • The output encoding
• ZZ04: Unknown or unsupported encoding. <CodecFactory.java>
  • The encoding
• ZZ05: Could not flush the console. <ConsoleOutputStream.java>
• ZZ06: Error writing to console. <ConsoleOutputStream.java>
• ZZ07: Error writing to console. <ConsoleOutputStream.java>
• ZZ08: Error writing to console. <ConsoleOutputStream.java>
• ZZ09: Could not obtain the available number of bytes left. <ResourceInputStream.java>
  • The error value
• ZZ0a: Closing of resource resulted in an IOException. <ResourceInputStream.java>
• ZZ0b: Read of resource resulted in an IOException. <ResourceInputStream.java>
• ZZ0c: Invalid array type. <ArrayUtils.java>
• ZZ0d: Invalid array type. <ArrayUtils.java>
• ZZ0e: Negative number of dimensions available or input type is not correct for the array type. <ArrayUtils.java>
• ZZ0f: Could not find the sub-type for multi-dimensional array. <ArrayUtils.java>
• ZZ0g: Cannot have a zero or negative buffer size. <BufferedReader.java>
• ZZ0h: Requested a buffer size that is zero or negative. <BufferedWriter.java>
  • The requested buffer size
• ZZ0i: Cannot initialize output stream using a negative capacity. <ByteArrayOutputStream.java>
• ZZ0j: The zero byte cannot be represented with a zero value. <DataInputStream.java>
• ZZ0k: Invalid double byte character. <DataInputStream.java>
  • The byte sequence
• ZZ0l: Invalid double byte character. <DataInputStream.java>
  • The byte sequence
• ZZ0m: Invalid byte sequence. <DataInputStream.java>
  • The byte
• ZZ0n: Reset is not supported. <InputStream.java>
• ZZ0o: Read of input byte sequence exceeded the maximum specified sequence length. <InputStreamReader.java>
  • The store length
• ZZ0p: Read of input byte sequence exceeded the maximum specified sequence length. <InputStreamReader.java>
  • The store length
• ZZ0q: Did not expect the buffer to be out of room. <PrintStream.java>
• ZZ0r: Array index out of bounds. <ArrayIndexOutOfBoundsException.java>
  • The index
• ZZ0s: Assertion string conversion failed with no message. <AssertionError.java>
• ZZ0t: Byte value out of bounds. <Byte.java>
• ZZ0u: Byte value out of range. <Byte.java>
• ZZ0v: The specifed class is not a sub-class of this class. <Class.java>
  • The class being checked
  • The current class
• ZZ0w: The other class cannot be casted to this class. <Class.java>
  • This class
  • The other class
• ZZ0x: Cannot construct new instance of class because it has no default constructor. <Class.java>
• ZZ0y: Could not allocate new instance. <Class.java>
• ZZ0z: Could not find the specified class. <Class.java>
  • The name of the class
• ZZ10: Enum has no string. <Enum.java>
• ZZ11: Enum has negative ordinal. <Enum.java>
• ZZ12: Enums cannot be cloned. <Enum.java>
• ZZ13: Cannot compare enums of a different type. <Enum.java>
• ZZ14: Cannot get the value of a non-enumeration type or it has no implicit values() method. <Enum.java>
• ZZ15: Not an enumeration value. <Enum.java>
  • The value
• ZZ16: Cannot decode an empty string. <Integer.java>
• ZZ17: Misplaced sign. <Integer.java>
  • The input string
• ZZ18: Could not parse number. <Integer.java>
  • The input string
• ZZ19: The radix is out of bounds. <Integer.java>
  • The radix
• ZZ1a: String is null or has zero length. <Integer.java>
• ZZ1b: Character out of range of radix. <Integer.java>
  • The input string
  • The out of range character
• ZZ1c: Input integer out of range of 32-bit integer. <Integer.java>
  • The input string
• ZZ1d: This object does not support being cloned. <Object.java>
• ZZ1e: This thread does not own the monitor for this thread. <Object.java>
• ZZ1f: This thread does not own the monitor for this thread. <Object.java>
• ZZ1g: Cannot wait on monitor because this thread does not own the monitor. <Object.java>
• ZZ1h: Wait operation has been interrupted. <Object.java>
• ZZ1i: Runtime permission name cannot be empty. <RuntimePermission.java>
• ZZ1j: Request to check access to system property with an empty key. <SecurityManager.java>
• ZZ1k: The specified encoding is not supported by the virtual machine. <String.java>
  • The encoding
• ZZ1l: Starting index in string is out of bounds. <String.java>
  • The starting index
• ZZ1m: String substring is outside of bounds. <String.java>
  • The start index
  • The end index
  • The length
• ZZ1n: The initial capacity cannot be negative. <StringBuilder.java>
  • The initial capacity
• ZZ1o: Out of bound access. <StringBuilder.java>
  • The index
• ZZ1p: Cannot insert sequence at a negative index. <StringBuilder.java>
• ZZ1q: The index of insertion exceeds the length of the current string. <StringBuilder.java>
  • The insertion index
  • The string length
• ZZ1r: Cannot insert sequence at a negative index. <StringBuilder.java>
• ZZ1s: The index of insertion exceeds the length of the current string. <StringBuilder.java>
  • The insertion index
  • The string length
• ZZ1t: Attempt to use a length of a negative size. <StringBuilder.java>
• ZZ1u: String index out of bounds. <StringBuilder.java>
• ZZ1v: String index out of bounds. <StringIndexOutOfBoundsException.java>
  • The index
• ZZ1w: Negative offsets and/or length cannot be specified. <System.java>
  • The source offset
  • The destination offset
  • The copy length
• ZZ1x: Copy operation would exceed the bounds of the array. <System.java>
  • Source offset
  • Source length
  • Destination offset
  • Destination length
  • The copy length
• ZZ1y: The source array type is not compatible with destination array. <System.java>
  • The source array
  • The destination array
• ZZ1z: Cannot request a system property which has a blank key. <System.java>
• ZZ20: Invalid priority. <Thread.java>
• ZZ21: A thread may only be started once. <Thread.java>
• ZZ22: Could not start the thread. <Thread.java>
• ZZ23: Invalid sleep arguments. <Thread.java>
• ZZ24: Sleep was interrupted. <Thread.java>
• ZZ25: Real ID has not been set yet while in the lock, this should not occur unless the virtual machine is very broken. <Thread.java>
• ZZ26: Cannot add a suppressed exception which is this exception. <Throwable.java>
• ZZ27: Cannot initialize the cause of the throwable with itself as the cause. <Throwable.java>
• ZZ28: The cause of the throwable has already been initialized. <Throwable.java>
• ZZ29: Cannot specify a negative clip for a stack trace. <Throwable.java>
• ZZ2a: A negative timeout was specified. <ReferenceQueue.java>
• ZZ2b: The name for basic permissions cannot be empty. <BasicPermission.java>
• ZZ2c: No previously returned element was iterated, it was already removed, or an element was added. <__AbstractListListIterator__.java>
• ZZ2d: List has been concurrently modified. <__AbstractListListIterator__.java>
• ZZ2e: Attempt to initialize array list with a negative capacity. <ArrayList.java>
  • The capicity
• ZZ2f: The sort range exceeds the array bounds. <Arrays.java>
• ZZ2g: The from index exceeds the to index. <Arrays.java>
• ZZ2h: Out of bounds access when sorting array. <Arrays.java>
• ZZ2i: The formatter has been closed. <Formatter.java>
• ZZ2j: Could not flush the formatter. <Formatter.java>
• ZZ2k: This formatter has been closed. <Formatter.java>
• ZZ2l: The formatter has been closed. <Formatter.java>
• ZZ2m: The formatter has been closed. <Formatter.java>
• ZZ2n: Unimplemented conversion. <Formatter.java>
  • The conversion
• ZZ2o: Could not parse the format specifier properly. <Formatter.java>
  • The string with the specifier sequence
• ZZ2p: Could not clone the map. <HashMap.java>
• ZZ2q: Could not clone the map. <HashSet.java>
• ZZ2r: Could not clone the hashtable. <Hashtable.java>
• ZZ2s: Cannot get the first element because the linked list is empty. <LinkedList.java>
• ZZ2t: Cannot get the last element because the linked list is empty. <LinkedList.java>
• ZZ2u: Cannot remove the element from the linked list because there was no previous call to next or previous, or add was called. <__LinkedListListIterator__.java>
• ZZ2v: Cannot set the element from the linked list because there was no previous call to next or previous, or add was called. <__LinkedListListIterator__.java>
• ZZ2w: List has been concurrently modified. <__LinkedListListIterator__.java>
• ZZ2x: Property permission key cannot be negative. <PropertyPermission.java>
• ZZ2y: The specified action is not valid for property permissions. <PropertyPermission.java>
  • The action
  • The input actions
• ZZ2z: Cap value must be a positive integer <Random.java>
• ZZ30: Could not load the service class. <ServiceLoader.java>
• ZZ31: Could not read the services list <ServiceLoader.java>
• ZZ32: Initial capacity cannot be negative. if (__cap < 0) throw new IllegalArgumentException("ZZ32"); this.elementData = new Object[__cap]; this.capacityIncrement = (__inc < 0 ? 0 : __inc); <Vector.java>
• ZZ33: The initial capacity of the weak hash map is negative. <WeakHashMap.java>
  • The negative initial capacity
• ZZ34: The load factor of the weak hash map is not positive. <WeakHashMap.java>
  • The non-positive load factor
• ZZ35: No map to copy data from was specified. <WeakHashMap.java>
• ZZ36: The initial capacity of the map cannot be negative. <__BucketMap__.java>
• ZZ37: The load factor must be a positive value. <__BucketMap__.java>
• ZZ38: Backing map has been modified. <__BucketMap__.java>
• ZZ39: Map has no more entries remaining. <__BucketMap__.java>
• ZZ3a: Null argument was passed. <__PrintFState__.java>
• ZZ3b: Request to use argument which is not within the bounds of the input arguments. <__PrintFState__.java>
  • The argument index
• ZZ3c: Expected argument of one class however it was instead another class. <__PrintFState__.java>
  • The requested class
  • The actual class
• ZZ3d: Argument index already set or is of an invalid value. <__PrintFState__.java>
  • The index used
• ZZ3e: The conversion has already been specified. <__PrintFState__.java>
• ZZ3f: Invalid conversion specified. <__PrintFState__.java>
  • The first character
  • The second character
• ZZ3g: The specified flag cannot be specified for the given conversion. <__PrintFState__.java>
  • The conversion
  • The flag
• ZZ3h: Width cannot be specified for the given convesion. <__PrintFState__.java>
  • The conversion
• ZZ3i: Precision cannot be specified for the given conversion. <__PrintFState__.java>
  • The conversion
• ZZ3j: Always signed and space for positive values cannot be combined for format flags. <__PrintFState__.java>
• ZZ3k: Width already or is of an invalid value. <__PrintFState__.java>
  • The width used
• ZZ3l: No width was specified where one was expected. <__PrintFState__.java>
• ZZ3m: Cannot use a date which is far into the past. <__TimerThread__.java>
• ZZ3n: The delay cannot be negative. <__TimerThread__.java>
• ZZ3o: The period cannot be zero or negative. <__TimerThread__.java>
• ZZ3p: Cannot add a task to a timer which was cancelled or a task which was cancelled. <__TimerThread__.java>
• ZZ3q: The destination array is too small. <Vector.java>
• ZZ3r: End point is before starting point. <__AbstractListSubList__.java>
• ZZ3s: Decimal integers cannot have an alternative form. <Formatter.java>
• ZZ3t: Invalid flag specified for unsigned formatted value. <Formatter.java>
• ZZ3u: It is not valid to register the zero IPC ID. <IPCManager.java>

te -- __

• test: .dump=bool Dump test result manifests? <__CoreTest__.java>